ITQ2415SA Power Supplies - Board Mount |
|
Allicdata Part #: | 1470-2863-5-ND |
Manufacturer Part#: |
ITQ2415SA |
Price: | $ 15.94 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | XP Power |
Short Description: | DC-DC 6W SINGLE O/P 4:1 INPUT SI |
More Detail: | Isolated Module DC DC Converter 1 Output 15V 40... |
DataSheet: | ITQ2415SA Datasheet/PDF |
Quantity: | 52 |
Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
Lead Free Status / RoHS Status: | Lead free / RoHS Compliant |
1 +: | $ 14.49000 |
5 +: | $ 14.05530 |
10 +: | $ 13.62060 |
25 +: | $ 13.04100 |
100 +: | $ 12.17160 |
500 +: | $ 11.30220 |
Voltage - Output 3: | -- |
Control Features: | Enable, Active Low |
Size / Dimension: | 0.86" L x 0.36" W x 0.44" H (21.8mm x 9.2mm x 11.1mm) |
Package / Case: | 8-SIP Module, 6 Leads |
Mounting Type: | Through Hole |
Efficiency: | 87% |
Operating Temperature: | -40°C ~ 100°C |
Features: | Remote On/Off, SCP |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 1.5kV |
Power (Watts): | 6W |
Current - Output (Max): | 400mA |
Series: | ITQ |
Voltage - Output 2: | -- |
Voltage - Output 1: | 15V |
Voltage - Input (Max): | 36V |
Voltage - Input (Min): | 9V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Moisture Sensitivity Level (MSL): | -- |
Part Status: | Active |
Lead Free Status / RoHS Status: | -- |
Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC DC Converters, with their wide range of applications, are an important component of electronic power systems. The ITQ2415SA is a buck converter device from Infineon that is widely used in power conversion applications and is suitable for an input voltage ranging from 5.5V to 40V. This converter features synchronous rectification which improves the efficiency, making it suitable for applications where higher efficiency is required.
The basic working principle of the ITQ2415SA is based on the buck converter topology, in which the input voltage is switched, rectified and filtered. This provides the output with a regulated voltage. The basic switching converter consists of four components: an input signal, a switch (MOSFET), a diode, and a filter capacitor. The ITQ2415SA uses the PWM technique to switch the input voltage and regulate the output voltage. Two series MOSFETs are used to form a switch and a rectifying diode is used for rectification. The switch is controlled by a voltage feedback signal, which is received from the output of the converter. This feedback signal is compared against a reference voltage and used to control the duty cycle of the switching operation. The filter capacitor is used to smooth out the PWM generated voltage waveform and provide the output voltage with smooth, continuous, and regulated voltage supply.
The ITQ2415SA can be used in a variety of automotive, computing, communication, and other power conversion applications. It is widely used in automotive applications due to its high efficiency, wide input voltage range, and compact size. Its synchronous rectification helps it to achieve high efficiency even at light loads. It is also suitable for communication and computing applications as it has built-in thermal protection,current limit, and overvoltage protection features. The device can also be used as a pre-regulator for LED lighting applications, or as a constant voltage and current source for industrial and consumer applications.
The ITQ2415SA has many advantages that make it suitable for a variety of power conversion applications. It can be used to convert a high-voltage input into a regulated lower-voltage output, and its wide input voltage range makes it suitable for a variety of input voltages. Its synchronous rectification improves efficiency and provides protection against typical over- and under-voltages. Its thermal protection, current limit, and overvoltage protection features also make it suitable for use in applications that require protection against these common issues. Finally, its compact size makes it convenient for applications where space is limited. Overall, the ITQ2415SA is a highly reliable and efficient buck converter device that can be used in a wide variety of applications where power conversion is required.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
ITQ2415SA | XP Power | 15.94 $ | 52 | DC-DC 6W SINGLE O/P 4:1 I... |
ITQ2424SA | XP Power | 15.94 $ | 42 | DC-DC 6W SINGLE O/P 4:1 I... |
ITQ2412SA | XP Power | 15.94 $ | 10 | DC-DC 6W SINGLE O/P 4:1 I... |
ITQ2403SA | XP Power | 15.94 $ | 35 | DC-DC 6W SINGLE O/P 4:1 I... |
ITQ2415S | XP Power | 16.63 $ | 37 | DC-DC 6W DUAL O/P 4:1 INP... |
ITQ2405S | XP Power | 16.63 $ | 29 | DC-DC 6W DUAL O/P 4:1 INP... |
ITQ2412S | XP Power | 16.63 $ | 160 | DC-DC 6W DUAL O/P 4:1 INP... |
ITQ2405SA | XP Power | 15.94 $ | 242 | DC-DC 6W SINGLE O/P 4:1 I... |
ITQ2409SA | XP Power | 15.94 $ | 242 | DC-DC 6W SINGLE O/P 4:1 I... |
ITQ2403SA-H | XP Power | 16.93 $ | 1000 | DC DC CONVERTER 3.3V 6WIs... |
ITQ2405SA-H | XP Power | 16.93 $ | 1000 | DC DC CONVERTER 5V 6WIsol... |
ITQ2409SA-H | XP Power | 16.93 $ | 1000 | DC DC CONVERTER 9V 6WIsol... |
ITQ2412SA-H | XP Power | 16.93 $ | 1000 | DC DC CONVERTER 12V 6WIso... |
ITQ2415SA-H | XP Power | 16.93 $ | 1000 | DC DC CONVERTER 15V 6WIso... |
ITQ2424SA-H | XP Power | 16.93 $ | 1000 | DC DC CONVERTER 24V 6WIso... |
ITQ2405S-H | XP Power | 17.59 $ | 1000 | DC DC CONVERTER +/-5V 6WI... |
ITQ2412S-H | XP Power | 17.59 $ | 1000 | DC DC CONVERTER +/-12V 6W... |
ITQ2415S-H | XP Power | 17.59 $ | 1000 | DC DC CONVERTER +/-15V 6W... |
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...