IUG11-1REC4-28280-2 Circuit Protection

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Circuit breakers are devices that are designed to protect electronic equipment from the damaging effects of electric currents. The IUG11-1REC4-28280-2 circuit breaker is a single pole Electronic Thermal-Magnetic trip unit. It is designed to protect against the overload, short circuit and ground fault conditions of a circuit.

The IUG11-1REC4-28280-2 circuit breaker is ideal for use in applications such as industrial automation, digital system, telecommunications and control system. The breaker is used in indoor applications which have an ambient temperature of up to 40 degrees Celsius and an atmospheric pressure of up to 86 kilopascals. The operating voltage range of the breaker is from 115 Volts AC and the trip current of the device is adjustable from 0.1 to 10 Amps.

The IUG11-1REC4-28280-2 circuit breaker works by using a combination of thermal and magnetic forces to detect when the current flowing through the circuit exceeds a predetermined limit. The thermal element of the breaker detects the amount of current and trips the breaker when the current exceeds a predetermined limit. The magnetic element of the breaker, on the other hand, detects when the current is much higher than the trip current of the breaker and trips it immediately.

The IUG11-1REC4-28280-2 circuit breaker is designed to protect the electrical system from the damaging effects of high currents. The breaker can detect current overloads and short circuits and trip before the current can cause damage to the equipment and the circuit. The breaker is also designed to provide acceptable levels of operational safety against insulation failure or ground faults.

The IUG11-1REC4-28280-2 circuit breaker is a single pole thermal magnetic trip unit, which is designed for use in industrial automation and control system applications. The breaker is designed to protect the system from overload, short circuit and ground fault conditions. The breaker has an adjustable trip current of 0.1 to 10 Amps and is designed to protect against the dangerous effects of electric currents.

The specific data is subject to PDF, and the above content is for reference