IUG6-35246-15

What is a Circuit Breaker?

A circuit breaker is a safety device designed to control and protect an electrical power system from damage caused by excess current through electrical appliances or malfunctioning wiring. Circuit breakers can be used in both residential and commercial settings and are typically found in breaker boxes. They are designed to open a circuit when a particular threshold is exceeded, meaning the current stops flowing through the system. When the current resumes, the circuit breaker should shut off accordingly. Circuit breakers are important safety devices that prevent fires and other electrical problems from damaging homes and businesses.

IUG6-35246-15 Circuit Breaker

The IUG6-35246-15 circuit breaker is a single-pole, double-throw (SPDT) type device. It is able to both trip and reset itself in response to an overload condition. It is typically used in industrial and commercial applications, such as lighting and power distribution systems. This type of circuit breaker is designed to meet UL 489 requirements and is rated for currents up to 125A. This makes the IUG6-35246-15 the ideal choice for applications requiring a combination of overload protection and flexibility.

Application Field of IUG6-35246-15 Circuit Breaker

The IUG6-35246-15 circuit breaker is best suited for panel applications, where it helps to protect the power system from overloads. The 120/125 Amp rating ensures that it is suitable for low amperage applications, such as lighting and power distribution boxes, as well as higher amperage applications, such as breaker panels and industrial equipment. The UL 489 certification provides the extra security of being able to be used in any type of commercial or industrial environment.

Working Principle of IUG6-35246-15 Circuit Breaker

The IUG6-35246-15 circuit breaker works by tripping and resetting itself in response to an overload condition. The device is designed with a single-pole, double-throw (SPDT) configuration, which allows for two different ways to control the circuit. The SPDT switch has a “normally open” position that latches closed in response to an overload. It also has a “normally closed” position, which opens in response to the same overload.

The circuit breaker also has a trip time setting, which is the length of time needed to open the circuit. This is adjustable and is typically used to customize the protection level of the device. A trip time too short might cause nuisance trips, while a trip time too long can lead to fire or other damage.

The IUG6-35246-15 also has an adjustable current-setting knob, which allows you to set the tripping level to match the specific requirements of your application. The adjustable current setting is what allows the breaker to trip and reset itself in the event of an overload.

When the current in the circuit exceeds the trip setting, the switch will automatically trip and open the circuit. This will stop the flow of current, shutting off power to the device or area of the circuit that was overloaded. Once the fault has been corrected, the switch can be reset, allowing for current to flow again.

Conclusion

The IUG6-35246-15 circuit breaker is a single-pole, double-throw (SPDT) device that is designed to provide overload protection for panel applications. It is UL 489 certified and rated for currents up to 125A, making it suitable for both low amperage and higher amperage applications. It is designed to trip and reset itself in response to an overload condition, and also has adjustable current and time settings, allowing you to customize the protection level of the device.