IUGF6-32830-25

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Circuit breakers are devices that are used to protect electrical equipment. They are designed to detect a fault condition, such as an overload or short circuit, and to open the circuit before it causes any damage. IUGF6-32830-25 is a type of circuit breaker with a UL listed branch-circuit rating of 15A at 120/240VAC and a maximum interrupting capacity of 18kA. In this article, the application field and working principle of IUGF6-32830-25 will be discussed.

Application Field: IUGF6-32830-25 circuit breakers are suitable for use in small commercial and residential panel boards and in unit equipment, such as air conditioners, to protect against overload, short circuit, and over-temperature. They are also suitable for use as motor overload protection and as the main disconnect device in equipment. The circuit breaker is designed to trip between 1.2 and 3.0 times its current rating, depending on the situation.

Working Principle: The IUGF6-32830-25 circuit breaker works by detecting a fault condition, such as an overload or short circuit, and tripping the circuit before it does any damage to the connected equipment. This is done by using two components - a trip unit and an actuator. The trip unit contains adjustable trip settings that allow it to detect the fault condition. The actuator then triggers the circuit breaker to open the circuit when the fault is detected.

The trip unit is calibrated to the circuit breaker’s rating, which enables it to detect a fault condition much faster than a non-calibrated device. This allows the IUGF6-32830-25 circuit breaker to react quickly to a fault condition, thereby preventing any damage to the connected equipment.

In addition, the IUGF6-32830-25 circuit breaker is designed to protect against short circuits, overloads, and over-temperature fault conditions. It is also designed with a manual reset button, allowing for easy resetting after the fault condition is cleared. This ensures that the circuit breaker is always in the correct position at all times.

Overall, the IUGF6-32830-25 circuit breaker is designed to protect against overload, short circuit, and over-temperature. It is suitable for use in small commercial and residential panel boards and in unit equipment, such as air conditioners. It is also designed with a manual reset button, allowing for easy resetting after the fault condition is cleared. This ensures that the circuit breaker is always in the correct position at all times, protecting the connected equipment from any damage.

The specific data is subject to PDF, and the above content is for reference