J1MAP-12XM

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Signal relays are a type of electrical device which is used to switch an electrical signal from one node of a network to another. These devices are used widely in industrial, automotive and consumer electronics applications. J1MAP-12XM is a type of signal relay that offers up to 2 amps for switching an electrical signal. This device is well suited for use in applications where the low power supply and load requirements are of primary concern.

The J1MAP-12XM relay is a hermetically sealed device with a minimum contact gap of 0.220 inch (5.60 mm). It has a maximum operating temperature range of up to 85°C. The device comes with a double make-break contact design which allows for a high level of reliability. The contact material is a Nickel-Iron alloy and the contact finish is silver.

The switching system of the J1MAP-12XM is designed to perform rapidly and efficiently. It uses a small 1/2 Hz coil as its actuator and the coil frequencies vary from 0.7 to 0.8 kHz. A single pole contact is used for switching on and off the electrical signal and a normally open contact is used as the indicator. The nominal voltage rating of the J1MAP-12XM relay is 5 to 48 Volts DC.

The J1MAP-12XM relay comes with a variety of features which make it suitable for use in various applications. It is designed with a high level of protection against moisture and dust and is IP67 rated for outdoor use. The relay features an over-voltage protection which ensures the switch contacts are never subject to more than the maximum rated voltage. It also has a low-power consumption feature which enables the device to operate without the need for any external power source.

The J1MAP-12XM relay is also designed with a shockproof diaphragm assembly which can handle vibrations and impacts up to 5 g’s in magnitude. The relay also features a thermal protection system which can shut off the power supply in the event of overheating. The J1MAP-12XM relay also has a high level of insulation resistance and a low dielectric strength which can withstand high voltages without any danger of arc formation.

The J1MAP-12XM relay can be used in a wide range of applications. It is often used for switching low voltage circuits such as telephone systems and security systems. It is also used in the automotive industry for ignition systems and power steering systems. It can also be used in industrial environments where it can be used to control high current devices such as pumps and motors.

In conclusion, the J1MAP-12XM is a highly reliable and versatile signal relay which is capable of switching an electrical signal up to two amps with minimal power consumption. Its features make it well suited for use in various applications where the reliability and low power requirements are of primary concern.

The specific data is subject to PDF, and the above content is for reference