JCG1548S05

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC to DC converters are a type of integrated circuit used to convert one type of DC voltage to another. The most common applications are to convert the voltage of a battery or controller-generated DC voltage to the higher voltages of electric motors, such as a brushless DC motor, or to extend the current drive capabilities of an existing power source. The basic operating principle of a DC to DC converter is fairly simple: it uses rectification, diode-controlled voltage conversion, regulation, and other components to meet the desired voltage and current levels.

JCG1548S05 is a common DC to DC converter and can be used in a variety of applications. It is a high-performance, total power efficient, dual-channel DC-DC step-down converter, with a 2A output current per channel from a wide input voltage range of 6.5 to 40V. It includes protection from output short-circuit and over-temperature. The device includes an internal MOS Driver so external switches are not required, allowing for easier application design. It also has an adjustable frequency and soft-start feature.

The JCG1548S05 is ideally suited for applications such as electric vehicle powertrains, battery charger applications, DC motor control, and other applications requiring multiple differential outputs. It can also be used for high-current loads as it can support an input current of up to 8A. The device has a low output current ripple and fast transient response through a 0.14 μH external inductor. It is also compliant with the wide temperature range requirements of automotive applications.

The JCG1548S05 uses a buck-boost converter topology to efficiently generate a regulated output voltage. It is a type of “switched-mode” power converter as it relies on switching elements and passive components to convert the input voltage to a regulated output voltage. The switching elements used in the JCG1548S05 are MOSFETs, which are turned on and off at a controlled frequency in order to transfer power from the input to the output. The switching elements are controlled by a feedback loop and a Digital Gate Driver, which signals when the MOSFETs need to be switched.

The input voltage is first rectified and filtered in order to produce a DC input voltage. This DC voltage is then applied to the switching elements, which turn on and off at a high frequency in order to transfer the power from the input to the output. The output voltage is regulated by a feedback loop which monitors the output voltage and sends a signal to the Digital Gate Driver when the output voltage needs to be adjusted.

The JCG1548S05 is an efficient and robust DC-DC converter for a wide range of applications. Its buck-boost topology allows for a wide range of input and output voltage combinations and is a cost effective solution for applications requiring stable and regulated output voltages. The internal circuitry ensures a fast transient response and can be fine-tuned with the external components for optimal performance.

The specific data is subject to PDF, and the above content is for reference