Allicdata Part #: | JCK2048S3V3-ND |
Manufacturer Part#: |
JCK2048S3V3 |
Price: | $ 25.41 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | XP Power |
Short Description: | DC DC CONVERTER 3.3V 20W |
More Detail: | Isolated Module DC DC Converter 1 Output 3.3V 5... |
DataSheet: | JCK2048S3V3 Datasheet/PDF |
Quantity: | 1000 |
10 +: | $ 23.09580 |
Current - Output (Max): | 5.5A |
Control Features: | Enable, Active High |
Size / Dimension: | 2.00" L x 1.00" W x 0.40" H (50.8mm x 25.4mm x 10.2mm) |
Package / Case: | 6-DIP Module |
Mounting Type: | Through Hole |
Efficiency: | 91% |
Operating Temperature: | -40°C ~ 100°C |
Features: | Remote On/Off, OCP, OVP, SCP, UVLO |
Applications: | ITE (Commercial) |
Voltage - Isolation: | 1.6kV |
Power (Watts): | 20W |
Series: | JCK |
Voltage - Output 3: | -- |
Voltage - Output 2: | -- |
Voltage - Output 1: | 3.3V |
Voltage - Input (Max): | 75V |
Voltage - Input (Min): | 36V |
Number of Outputs: | 1 |
Type: | Isolated Module |
Part Status: | Active |
Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC Converters are widely used in industry, and the JCK2048S3V3 Converter is one type of them. This DC-DC Converter is capable of providing an output voltage from 0.6V to 3.3V with an accuracy of ±2%. In addition, the JCK2048S3V3 is a non-isolated board level DC-DC Converter which was designed for point-of-load (POL) applications and isolate applications from external input line disturbances.
The JCK2048S3V3 works by taking an input voltage (on its Vin pin) from 4.5V to 14V up to 48V and then enhances the voltage to a precise level before outputting (on its Vout pin). This operation consists of two self-contained sections, a PFC (Power Factor Correction) Stage, and a second stage, which is an isolated full bridge synchronous PWM/PFM converter.
The PFC stage in the JCK2048S3V3 enables high efficiency, low input current ripple and low no-load power consumption. The PFC stage is composed of a boost converter, a diode and an inductor, and the circuit works by boosting the lower input voltage into a higher voltage by means of an inductor current. The PFC stage also regulates the current to ensure that the output current matches the input current, and it achieves this by using a simple current loop.
The second stage of the JCK2048S3V3 converter is an isolated full bridge synchronous PWM/PFM converter. This circuit consists of two transistors, two diodes, an inductor, a feedback resistor and a capacitive filter. The circuit works by controlling the switching of the transistors in order to maintain the required voltage on the output pin. The feedback resistor monitors the output voltage and adjusts the switching of the transistors to ensure that the output voltage remains at the required level. The capacitive filter is used to reduce noise and ripple at the output.
The JCK2048S3V3 has a wide range of applications which include communication and storage, industrial control and automation, medical applications, renewable energy sources, automotive systems and military applications. The DC-DC Converters are also widely used in applications that require high power conversion efficiency such as personal computers and servers. The output voltage accuracy, high efficiency and low noise make the JCK2048S3V3 an ideal solution for many applications.
In conclusion, the JCK2048S3V3 is a non-isolated board level DC-DC Converter which is designed for point-of-load and isolate applications. The JCK2048S3V3 operates in two stages, firstly a PFC stage and then an isolated full bridge synchronous PWM/PFM converter. The converter has a wide range of applications, such as communication and storage, industrial control and automation, medical applications, renewable energy sources, automotive systems and military applications. With its output voltage accuracy, high efficiency and low noise, the JCK2048S3V3 makes an ideal solution for many power conversion applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
JCK2024S05 | XP Power | 27.03 $ | 42 | DC/DC CONVERTER 5V 20WIso... |
JCK2012S15 | XP Power | 27.03 $ | 45 | DC/DC CONVERTER 15V 20WIs... |
JCK2012S05 | XP Power | 27.03 $ | 65 | DC/DC CONVERTER 5V 20WIso... |
JCK2012S12 | XP Power | 27.03 $ | 56 | DC/DC CONVERTER 12V 20WIs... |
JCK2048S12 | XP Power | 27.03 $ | 19 | DC/DC CONVERTER 12V 20WIs... |
JCK2024S12 | XP Power | 27.03 $ | 10 | DC/DC CONVERTER 12V 20WIs... |
JCK2012S3V3 | XP Power | 25.41 $ | 1000 | DC DC CONVERTER 3.3V 20WI... |
JCK2024S15 | XP Power | 25.41 $ | 1000 | DC DC CONVERTER 15V 20WIs... |
JCK2024S3V3 | XP Power | 25.41 $ | 1000 | DC DC CONVERTER 3.3V 20WI... |
JCK2048S05 | XP Power | 25.41 $ | 1000 | DC DC CONVERTER 5V 20WIso... |
JCK2048S15 | XP Power | 25.41 $ | 1000 | DC DC CONVERTER 15V 20WIs... |
JCK2048S3V3 | XP Power | 25.41 $ | 1000 | DC DC CONVERTER 3.3V 20WI... |
JCK2012D12 | XP Power | 25.73 $ | 1000 | DC DC CONVERTER +/-12V 20... |
JCK2012D15 | XP Power | 25.73 $ | 1000 | DC DC CONVERTER +/-15V 20... |
JCK2024D12 | XP Power | 25.73 $ | 1000 | DC DC CONVERTER +/-12V 20... |
JCK2024D15 | XP Power | 25.73 $ | 1000 | DC DC CONVERTER +/-15V 20... |
JCK2048D12 | XP Power | 25.73 $ | 1000 | DC DC CONVERTER +/-12V 20... |
JCK2048D15 | XP Power | 25.73 $ | 1000 | DC DC CONVERTER +/-15V 20... |
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...