Allicdata Part #: | JCK4048D15-ND |
Manufacturer Part#: |
JCK4048D15 |
Price: | $ 44.30 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | XP Power |
Short Description: | DC DC CONVERTER +/-15V 40W |
More Detail: | Isolated Module DC DC Converter 2 Output 15V -15V ... |
DataSheet: | JCK4048D15 Datasheet/PDF |
Quantity: | 1000 |
10 +: | $ 40.26960 |
Voltage - Input (Min): | 36V |
Voltage - Input (Max): | 75V |
Voltage - Output 1: | 15V |
Voltage - Output 2: | -15V |
Voltage - Output 3: | -- |
Current - Output (Max): | 1.33A, 1.33A |
Power (Watts): | 40W |
Voltage - Isolation: | 1.6kV |
Applications: | ITE (Commercial) |
Features: | Remote On/Off, OCP, OVP, SCP, UVLO |
Operating Temperature: | -40°C ~ 100°C |
Efficiency: | 92% |
Mounting Type: | Through Hole |
Package / Case: | 6-DIP Module |
Size / Dimension: | 2.00" L x 1.00" W x 0.40" H (50.8mm x 25.4mm x 10.2mm) |
Control Features: | Enable, Active High |
Series: | JCK |
Packaging: | Tube |
Part Status: | Active |
Type: | Isolated Module |
Number of Outputs: | 2 |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC DC converters are a common tool used in the design of power electronics. The JCK4048D15, in particular, is a DC DC converter used in a wide variety of applications.
The JCK4048D15 is a high efficiency DC to DC converter with synchronous rectification and temperature compensation, designed to provide a step-up voltage conversion ratio from 4:1 up to 20:1 in a single stage. It has an output voltage range of up to 40V, and has been designed to meet the requirements of high power, highly efficient applications. The JCK4048D15 also features wide temperature range inspection, a sync output waveform which eliminates all the power components, and a high efficiency conversion rate of up to 94%.
The JCK4048D15 is primarily used for applications such as telecom supplies, industrial power supplies, portable DC power sources, or consumer electronics. Its use in telecom supplies can be seen in cellular phone base stations, satellite communications, and wireless access point solutions. In industrial power supplies, the JCK4048D15 can be used for installations such as industrial lighting systems, motion control systems, or anywhere a low cost and reliable DC to DC converter is needed. In portable DC power sources, JCK4048D15\'s low profile and amazing power convertion rate makes it ideal for medical equipment, military applications, battery powered equipment, etc.
As far as the working principle of the JCK4048D15, it is essential to understand the basic operating principles of DC to DC conversion. The JCK4048D15 follows a switching power conversion technology that utilizes an input voltage, typically provided by a battery, to drive a high efficiency internal electrical power conversion process. The power conversion process is then used to convert the input voltage to a different, yet adjustable output voltage. This conversion is done through the use of two control circuits, referred to as the Voltage Mode Control and the Current Mode Control.
The Voltage Mode Control is designed to maintain the desired output voltage using switches, thus maintaining the desired output voltage at all times. The Current Mode Control circuit is designed to monitor the current flow in order to adjust the output voltage so as to maintain a consistent current flow. This allows the JCK4048D15 to be used for applications with widely varying load current demands.
The JCK4048D15 also features advanced protection functions built-in, such as over temperature protection, over voltage protection, over current protection, and short circuit protection. These functions allow the JCK4048D15 to interact with other electrical components without the risk of damage or failure.
In conclusion, the JCK4048D15 is a highly efficient DC to DC converter with synchronization rectification, temperature compensation, and excellent protection functions. It is ideal for a variety of applications including telecom supplies, industrial power supplies, portable DC power sources, and consumer electronics. Understanding the basic principles and features of the JCK4048D15 will allow designers to choose the most suitable and reliable DC to DC converter for their particular needs.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
JCK4024S12 | XP Power | 45.05 $ | 35 | DC/DC CONVERTER 12V 40WIs... |
JCK4012S12 | XP Power | 45.05 $ | 28 | DC/DC CONVERTER 12V 40WIs... |
JCK4012S05 | XP Power | 45.05 $ | 12 | DC/DC CONVERTER 5V 40WIso... |
JCK4024D15 | XP Power | 47.12 $ | 117 | DC/DC CONVERTER +/-15V 40... |
JCK4024S05 | XP Power | 45.05 $ | 410 | DC/DC CONVERTER 5V 40WIso... |
JCK4012S15 | XP Power | 42.34 $ | 1000 | DC DC CONVERTER 15V 40WIs... |
JCK4012S3V3 | XP Power | 42.34 $ | 1000 | DC DC CONVERTER 3.3V 40WI... |
JCK4024S15 | XP Power | 42.34 $ | 1000 | DC DC CONVERTER 15V 40WIs... |
JCK4024S3V3 | XP Power | 42.34 $ | 1000 | DC DC CONVERTER 3.3V 40WI... |
JCK4048S05 | XP Power | 42.34 $ | 1000 | DC DC CONVERTER 5V 40WIso... |
JCK4048S15 | XP Power | 42.34 $ | 1000 | DC DC CONVERTER 15V 40WIs... |
JCK4048S3V3 | XP Power | 42.34 $ | 1000 | DC DC CONVERTER 3.3V 40WI... |
JCK4048S12 | XP Power | 42.34 $ | 1000 | DC DC CONVERTER 12V 40WIs... |
JCK4012D12 | XP Power | 44.3 $ | 1000 | DC DC CONVERTER +/-12V 40... |
JCK4024D12 | XP Power | 44.3 $ | 1000 | DC DC CONVERTER +/-12V 40... |
JCK4048D15 | XP Power | 44.3 $ | 1000 | DC DC CONVERTER +/-15V 40... |
JCK4048D12 | XP Power | 44.3 $ | 1000 | DC DC CONVERTER +/-12V 40... |
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...