Allicdata Part #: | JCL3024D15-ND |
Manufacturer Part#: |
JCL3024D15 |
Price: | $ 44.37 |
Product Category: | Power Supplies - Board Mount |
Manufacturer: | XP Power |
Short Description: | DC DC CONVERTER +/-15V 30W |
More Detail: | Isolated Module DC DC Converter 2 Output 15V -15V ... |
DataSheet: | JCL3024D15 Datasheet/PDF |
Quantity: | 1000 |
5 +: | $ 40.33260 |
Voltage - Output 2: | -15V |
Voltage - Output 3: | -- |
Voltage - Output 4: | -- |
Current - Output (Max): | 1A, 1A |
Power (Watts): | 30W |
Voltage - Isolation: | 1.5kV |
Applications: | ITE (Commercial) |
Features: | Remote On/Off, OCP, OTP, OVP, SCP |
Operating Temperature: | -40°C ~ 100°C (With Derating) |
Efficiency: | 91% |
Mounting Type: | Through Hole |
Package / Case: | 7-DIP Module |
Size / Dimension: | 2.00" L x 1.60" W x 0.40" H (50.8mm x 40.6mm x 10.2mm) |
Supplier Device Package: | -- |
Series: | JCL30 |
Part Status: | Active |
Type: | Isolated Module |
Number of Outputs: | 2 |
Voltage - Input (Min): | 18V |
Voltage - Input (Max): | 36V |
Voltage - Output 1: | 15V |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
DC-DC converters are power electronic devices that enables regulated DC output voltage from an unregulated input voltage. The JCL3024D15 is a high efficiency DC-DC converter and is designed to convert from a wide 4.5V to 36V input voltage range to a 5V output voltage. It supports up to 15A output current and can be used in numerous applications.
The JCL3024D15 comes with a wide number of features which make it suitable for a variety of applications. It employs synchronous rectification with field desaturation to efficiently convert input voltage into 5V output. It also features output voltage trimming with +/-1% precision, over-current and over-temperature protection, input under-voltage protection, reverse input protection, and soft start.
In order to maximize efficiency, the JCL3024D15 employs a unique switch-ON when the input voltage is within 6% of the output voltage, allowing low-loss operations at high efficiency. Furthermore, its standby-mode quiescent current is only 1.5mA, allowing users to save power when the system is in a stand-by state. All of these features combine to make the JCL3024D15 suitable for modern application requirements.
The JCL3024D15 can be employed as an isolated converter for reliable operation in applications where there is significant potential difference between the input and output voltages. Due to its high efficiency rate and wide input voltage range, it can be used as DC to DC converter in systems that operate at high voltages such as photovoltaic panels or automobile power systems.
In addition, the JCL3024D15 can be used in applications that require high current without sacrificing power efficiency. It is suitable for powering LED lighting, motor control, and PC peripherals, where high current but accurate and stable output voltage is desired.
The working principle of the JCL3024D15 is quite simple. It uses Pulse Width Modulation (PWM) to convert an input voltage into a precision-regulated 5V output voltage. An oscillator drives the input voltage through a transformer and the transformer itself is then switched on and off following the PWM control signal. The use of synchronous rectification with field desaturation allows efficient conversion of voltage. Furthermore, the output voltage is then regulated by varying the duty cycle, allowing for an optimized output voltage.
The JCL3024D15 is thus a high efficiency, multi-functional DC-DC converter that can be used in a variety of applications. With its wide input voltage range, high efficiency rate, and numerous protection features, it is a reliable and cost-effective solution for powering electronic devices.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
JCL300B 2K 0.5% | Nidec Copal ... | 277.2 $ | 1000 | POTENTIOMETERS2k Ohm 1 Ga... |
JCL300B 5K 0.5% | Nidec Copal ... | 277.2 $ | 1000 | POTENTIOMETERS5k Ohm 1 Ga... |
JCL300B 10K 0.5% | Nidec Copal ... | 277.2 $ | 1000 | POTENTIOMETERS10k Ohm 1 G... |
JCL3012S05 | XP Power | 38.99 $ | 1000 | DC DC CONVERTER 5V 25WIso... |
JCL3012S12 | XP Power | 38.99 $ | 1000 | DC DC CONVERTER 12V 30WIs... |
JCL3012S15 | XP Power | 38.99 $ | 1000 | DC DC CONVERTER 15V 30WIs... |
JCL3012S3V3 | XP Power | 38.99 $ | 1000 | DC DC CONVERTER 3.3V 18WI... |
JCL3024S05 | XP Power | 38.99 $ | 1000 | DC DC CONVERTER 5V 25WIso... |
JCL3024S12 | XP Power | 38.99 $ | 1000 | DC DC CONVERTER 12V 30WIs... |
JCL3024S15 | XP Power | 38.99 $ | 1000 | DC DC CONVERTER 15V 30WIs... |
JCL3024S3V3 | XP Power | 38.99 $ | 1000 | DC DC CONVERTER 3.3V 18WI... |
JCL3048S05 | XP Power | 38.99 $ | 1000 | DC DC CONVERTER 5V 25WIso... |
JCL3048S12 | XP Power | 38.99 $ | 1000 | DC DC CONVERTER 12V 30WIs... |
JCL3048S15 | XP Power | 38.99 $ | 1000 | DC DC CONVERTER 15V 30WIs... |
JCL3048S3V3 | XP Power | 38.99 $ | 1000 | DC DC CONVERTER 3.3V 18WI... |
JCL3012D12 | XP Power | 44.37 $ | 1000 | DC DC CONVERTER +/-12V 30... |
JCL3012D15 | XP Power | 44.37 $ | 1000 | DC DC CONVERTER +/-15V 30... |
JCL3024D12 | XP Power | 44.37 $ | 1000 | DC DC CONVERTER +/-12V 30... |
JCL3024D15 | XP Power | 44.37 $ | 1000 | DC DC CONVERTER +/-15V 30... |
JCL3048D12 | XP Power | 44.37 $ | 1000 | DC DC CONVERTER +/-12V 30... |
JCL3048D15 | XP Power | 44.37 $ | 1000 | DC DC CONVERTER +/-15V 30... |
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 12V 240WIsolated Module ...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...
DC DC CONVERTER 1.8V 120WIsolated Module...