JF2-B3A3-DR RF/IF and RFID |
|
Allicdata Part #: | 943-1012-2-ND |
Manufacturer Part#: |
JF2-B3A3-DR |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Telit |
Short Description: | MODULE GPS RECEIVER SSIV |
More Detail: | - RF Receiver GPS 1.575GHz -163dBm On-Board, Trac... |
DataSheet: | JF2-B3A3-DR Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Memory Size: | -- |
Antenna Connector: | On-Board, Trace |
Features: | -- |
Voltage - Supply: | 1.79 ~ 1.9VDC |
Operating Temperature: | -40°C ~ 85°C |
Package / Case: | Module |
Supplier Device Package: | Module |
Series: | -- |
Packaging: | Tape & Reel (TR) |
Part Status: | Obsolete |
Frequency: | 1.575GHz |
Sensitivity: | -163dBm |
Data Rate (Max): | -- |
Modulation or Protocol: | GPS |
Applications: | General Purpose |
Current - Receiving: | 37mA |
Data Interface: | I²C, UART, SPI, 1PPS |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
RF receivers are a very important part of technology around the world. They are used in all forms of communication to receive signals, both for consumer products and for commercial applications. The JF2-B3A3-DR is one of the most popular RF receivers currently on the market. This article will discuss the applications and working principles of this particular model.
Applications
The JF2-B3A3-DR is a multifunctional RF receiver, making it suitable for a variety of applications. It can be used for commercial, governmental, and military purposes, but it is also popular among amateur radio enthusiasts. This device is typically used for receiving audio and video signals from satellites, ground-based scanners, and similar sources. It can also be used for communication purposes, such as in walkie-talkies and phone systems.
Technical Specifications
The JF2-B3A3-DR has a range of technical specifications that make it a great device for many applications. It has a frequency range of between 150 MHz and 1.4 GHz, and it has a gain of 0-45 dB over that range. The device also has an input and output power level of -20 dBm and 5 dBm, respectively.
Working Principle
The working principle of the JF2-B3A3-DR is fairly straightforward. It operates by using an oscillator to generate a radio frequency (RF). This RF is then sent to an antenna, which receives the signal from a specific signal source. The antenna then converts the signal into an electrical signal, which is then sent to the receiver. The receiver then amplifies the signal and sends it to the output.
Conclusion
The JF2-B3A3-Dr is a popular RF receiver that can be used in a wide variety of applications. The device has a range of technical specifications, including a frequency range of between 150MHz and 1.4GHz. Its working principle is relatively simple, as it utilizes an oscillator to generate an RF signal, which is then passed through an antenna and converted into an electrical signal. This signal is then amplified and sent to its output.
The specific data is subject to PDF, and the above content is for reference
Multi-band GNSS receiver with nanosecond...
High-performance LEA-6 series GPS module...
Simultaneous reception of GPS / QZSS, GL...
LEA-M8S module can receive up to 3 GNSS....
High-performance u-blox 6's LEA-6 se...
High-performance u-blox 5 LEA 5 series G...