Allicdata Part #: | JH53-50MHZ-ND |
Manufacturer Part#: |
JH53-50MHZ |
Price: | $ 12.43 |
Product Category: | Crystals, Oscillators, Resonators |
Manufacturer: | Connor-Winfield |
Short Description: | OSC XO 50.000MHZ HCMOS |
More Detail: | 50MHz XO (Standard) HCMOS Oscillator 5V 4-SMD, Gu... |
DataSheet: | JH53-50MHZ Datasheet/PDF |
Quantity: | 1000 |
100 +: | $ 11.18600 |
Series: | H53 |
Packaging: | Tube |
Part Status: | Active |
Base Resonator: | Crystal |
Type: | XO (Standard) |
Frequency: | 50MHz |
Function: | -- |
Output: | HCMOS |
Voltage - Supply: | 5V |
Frequency Stability: | ±100ppm |
Operating Temperature: | 0°C ~ 70°C |
Current - Supply (Max): | -- |
Ratings: | -- |
Mounting Type: | Surface Mount |
Package / Case: | 4-SMD, Gull Wing |
Size / Dimension: | 0.500" L x 0.500" W (12.70mm x 12.70mm) |
Height - Seated (Max): | 0.200" (5.08mm) |
Current - Supply (Disable) (Max): | -- |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Oscillators
An oscillator is an electronic circuit which induces alternating current (AC) signals of a specific frequency using active and passive electronic components. Oscillators are widely used in a variety of applications. JH53-50MHZ oscillators are just one of these oscillator types.
JH53-50MHZ Application Field
The application field of JH53-50MHZ oscillators is quite broad. It can be used in communication systems, such as radio, microwave, and satellite communication. It can also be used in wireless or fiber-optic broadband networks. Additionally, they can be used in various video systems, such as cable, satellite, and terrestrial, as well as in consumer electronics and other high-tech applications. JH53-50MHZ oscillators are also used in digital audio, aerospace, automotive, and marine navigation equipment.
JH53-50MHZ Working Principle
A JH53-50MHZ oscillator consists of an amplifier and an LC resonator circuit (lime-coupling) which produces periodic oscillations. The amplifier amplifies the sinusoidal oscillating signal from the LC resonator to the desired output level, and then the oscillator actually oscillates, or “rings,” at a desired frequency. The output signal from the oscillator is in the form of square, triangle, or sawtooth waves. The frequency of oscillation is determined by the LC resonator circuit.
The oscillation frequency of a JH53-50MHZ oscillator is dependent on the inductance and capacitance of the LC resonator. When current passes through the inductor, its magnetic flux links with the capacitor, and thereby causes an alternating voltage across the capacitor. The frequency at which the amplitude of the oscillations reaches its maximum level is determined by the ratio of the inductance to the capacitance. Once the frequency has been determined, it is possible to construct the output waveform for any desired frequency.
The purpose of the amplifier is to drive the oscillator circuit at a specific frequency. It also makes sure that the oscillator\'s output is at the desired voltage level. The amplifier is a voltage-controlled amplifier, meaning it responds to the voltage from the LC resonator. The amplitude of the output waveform is directly proportional to the input voltage supplied to the amplifier. This allows for precise control of the oscillator\'s frequency.
The two most common types of JH53-50MHZ oscillators are crystal oscillators and voltage-controlled oscillators (VCOs). Crystal oscillators are the most common type of oscillator because they are inherently stable and have a wide range of frequency output. VCOs are slightly less stable, but they have the advantage of being able to produce a wider range of frequencies.
In conclusion, JH53-50MHZ oscillators are used in a wide variety of applications. They use a combination of an amplifier and an LC resonator circuit to produce periodic oscillations at a specific frequency. This frequency is determined by the ratio of the inductance to the capacitance of the LC resonator. Two of the most common oscillators which use this technology are crystal oscillators and voltage-controlled oscillators.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
JH53-50MHZ | Connor-Winfi... | 12.43 $ | 1000 | OSC XO 50.000MHZ HCMOS50M... |
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 2520, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...
-20 TO 70C, 3225, 10PPM, 1.8V, 2Oscillat...