JLLN150.X

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The JLLN150.X is an electrical, specialty fuse. It is used in a variety of applications where short circuit protection is important. Its primary purpose is to protect electrical circuits and devices from accidental overload or short circuiting.

The JLLN150.X is an electronic component that contains a piece of wire, usually made out of metal, within a non-conductive material. The wire is connected to an indicator that indicates if the fuse has tripped, or been overloaded. This indicator could be a light, a visible line of change within the fuse indicator, or a voltage change. Once the fuse has tripped, it needs to be replaced.

This specialty fuse has a voltage rating of 150 volts, making it suitable for use in a variety of applications where voltages are relatively low. The current rating is 25 amperes, which is suitable for medium-sized applications. It also has an opening time of less than 4 hours and a breaking capacity of 6.3 kilovolts.

The JLLN150.X is a fast-acting low voltage fuse. This means that it has a short response time, usually less than 20 milliseconds, in order to protect electrical circuits and devices from overloads and short circuits. The fast response time of the fuse helps reduce the chance of fire or serious damage from an accidental overload or short circuit.

The fuse has a series of two metal ends that, when the fuse trips, rapidly heats up and opens the circuit. This halts the electrical current and breaks the circuit. This prevents an overload from causing serious damage to the electronic component.

The JLLN150.X has a low voltage rating, so it is suitable for applications where voltages are relatively low. It is also suitable for applications that require fast-acting protection, such as medical equipment or emergency lighting. In fact, the fuse is often used in circuit breakers, surge protection systems, solar-powered equipment, and toys.

The JLLN150.X is easy to install and replace. It simply needs to be clipped into place and the two metal ends are then connected. The fuse can be used in an AC or DC circuit, depending on the requirements of the application.

The JLLN150.X is a reliable and effective tool for providing short circuit protection in a wide variety of applications. It is easy to install and has a fast response time, making it ideal for protecting powering devices and equipment from overloads and short circuits.

The specific data is subject to PDF, and the above content is for reference