JN6FR07SM1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The JN6FR07SM1 is a rectangular connector common in the industrial wiring field, aimed at providing reliable and efficient electrical connection in settings with intermittent or continuous current flow. It offers reliable performance in a variety of settings and is suited well for traditional I/O wiring in industrial machinery. The JN6FR07SM1 is a class of rectangular connectors sometimes referred to as housings, due to their design which contains a base, header, and cover. The general design of the JN6FR07SM1 consists of the header, which is the construction on which all other components are built. On one side, the header usually has two or more hollow cavities for inserting pins, wires, and cables. The cable’s heads, wires, pins, or bodies within the cavities serve as electrical connection points. In addition to connecting points held together by fasteners, the header also contains terminals for connecting wires, terminals, and circuits outside the cavity. The header is made of an electrically insulating material, which isolates each of the connection points from each other and from the external environment. The base of the JN6FR07SM1 is manufactured with a rigidity and strength that supports the header, allowing it to fit snugly in place when the connector is assembled. It is typically made of machined molded plastic. The base also contains slots designed to provide stable anchoring for the cable’s pins or bodies. This helps to minimize noise and any potential instability resulting from excessive vibrations and impacts. The cover of the JN6FR07SM1 is constructed to fit over the header and base. This cover contains slots for sealing pins and prevent the connections from being affected by any environmental factors. The cover also has an overall seal around the connector, which is important for the proper functioning of any electrical system. The JN6FR07SM1 connector also contains a locking mechanism, which helps to minimize the risk of loosening or disconnecting of the cable’s connections due to excessive vibrations or impacts. This locking mechanism works by pressing the cover tightly against the base, thus pressing the pins and wires securely in place. The cover also serves as a protection from external influences. This helps to minimize any interference caused by moisture, dust, and other environmental factors.When the JN6FR07SM1 is fully assembled, it works by providing a reliable connection between the cables and their connection points. This is done by essentially closing off any potential path of current and acoustical signals. The connections are made secure and efficient with the use of the connection points, cable heads, pins, terminals, and any other element within the cavity. These connection points are held in place by the locking mechanism and the overall seal of the cover. The JN6FR07SM1 offers several tangible benefits for industrial wiring. Compared to other types of connectors, it is relatively easy to install, and requires no specific training to use. Furthermore, it is a reliable and efficient point-to-point wired connection in between terminals, wires, fibers, and cables. Lastly, its dust and moisture resistance ensures increased longevity of the connections. The JN6FR07SM1 is prized for its wide range of applications and superior performance. Its use is prevalent in traditional I/O wiring found in industrial machinery, as well as networks, sensors, and communication setups. It is also especially well suited for settings where low voltage circuits, high voltage lines, and grounding contacts must be connected together.

The specific data is subject to PDF, and the above content is for reference