JPS130PS24

Series:	*
Part Status:	Active
Type:	Open Frame
Number of Outputs:	1
Voltage - Input:	90 ~ 264 VAC
Voltage - Output 1:	24V
Voltage - Output 2:	--
Voltage - Output 3:	--
Voltage - Output 4:	--
Current - Output (Max):	4.5A
Power (Watts):	100W (130W Forced Air)
Applications:	ITE (Commercial)
Voltage - Isolation:	3000V
Efficiency:	90%
Operating Temperature:	0°C ~ 70°C (With Derating)
Features:	Adjustable Output, DC Input Capable, PFC, Remote Sense, Standby Output, Universal Input
Mounting Type:	Chassis Mount
Size / Dimension:	5.00" L x 3.00" W x 1.18" H (127.0mm x 76.2mm x 30.0mm)
Minimum Load Required:	No
Approvals:	CE

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

AC DC Converters

AC/DC converters are one of the most common power conversion devices used in the industrial market. They are used to convert alternating current (AC) to direct current (DC). Typical applications include motor control, power supply design, and solar energy systems.The JPS130PS24 AC/DC converter is a component used to convert AC into DC. It is a single-phase converter designed for a wide range of industrial applications with a power range from 15 to 24 kilowatts (kW). The JPS130PS24 is optimized for high efficiency and low harmonic distortion. It is a single-stage device with a voltage range of 200 to 480 VAC input; and a DC output voltage range from 90 to 550 Volts. It features reduced total harmonic distortion (THD) and a power factor of over 98%.The working principle of the JPS130PS24 involves three main components: an input rectifier, an output inverter, and a control block. The input rectifier is used to convert AC current into DC current. The output inverter then takes this DC current and converts it back into AC current with a different voltage. The control block is used to regulate and control the output voltage and frequency. The primary components of the JPS130PS24 are the input rectifier, output inverter, and control block. The input rectifier consists of an AC pre-regulator circuit, a full-wave rectifier, and a PFC inductor. The AC pre-regulator circuit is used to stabilize the DC voltage output of the rectifier. The full-wave rectifier converts AC voltage into DC voltage. The PFC inductor is used to reduce voltage distortion and improve the power factor.The output inverter is used to convert the DC voltage provided by the input rectifier into variable AC voltage. It consists of a power transistor, a pulse width modulation (PWM) controller, and an output transformer. The power transistor is used to control the output current. The PWM controller is used to generate the PWM signal, which is then used to control the output voltage and frequency. The output transformer is used to step down the voltage. The control block is used to regulate and control the output voltage and frequency. It consists of a current sensor, a voltage regulator, and a frequency controller. The current sensor is used to monitor and control the output current of the output inverter. The voltage regulator is used to ensure that the output voltage is within the desired range. The frequency controller is used to regulate and control the output frequency of the output inverter. The JPS130PS24 is a highly efficient single-phase converter that can be used in a wide range of industrial applications. Its primary components consist of an input rectifier, output inverter, and control block. The input rectifier is used to convert AC voltage into DC voltage. The output inverter converts the DC voltage into variable AC voltage. The control block is used to regulate and control the output voltage and frequency. It is optimized for high efficiency and low harmonic distortion and features a power factor of over 98%. The JPS130PS24 is an ideal choice for power supply design, motor control, and solar energy systems.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description