JRCW016A0R41-TZ

Series:	ORCA™ JRCW016A0R
Packaging:	Bulk
Part Status:	Active
Type:	Isolated Module
Number of Outputs:	1
Voltage - Input (Min):	36V
Voltage - Input (Max):	75V
Voltage - Output 1:	28V
Voltage - Output 2:	--
Voltage - Output 3:	--
Current - Output (Max):	16A
Power (Watts):	450W
Voltage - Isolation:	1.5kV
Applications:	ITE (Commercial)
Features:	Remote On/Off, OCP, OTP, OVP, UVLO
Operating Temperature:	-40°C ~ 85°C
Efficiency:	93.5%
Mounting Type:	Through Hole
Package / Case:	9-DIP Module, 1/2 Brick
Size / Dimension:	2.39" L x 2.27" W x 0.50" H (60.7mm x 57.7mm x 12.8mm)
Control Features:	Enable, Active Low

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC-DC Converters: JRCW016A0R41-TZ Application Field and Working Principle

DC-DC converters have been used in a wide range of fields for a long time, from commercial appliances to aerospace applications. In particular, JRCW016A0R41-TZ is a high-precision DC-DC converter used in space industries and typical chip level application due to its outstanding performance in different circumstances. In this article, we discuss about the application field and working principle of JRCW016A0R41-TZ.

Application Field

JRCW016A0R41-TZ is suitable for a wide variety of application fields. In space industries, it is widely used for satellite power systems since it can withstand a wide range of working conditions. It provides precise control and requires less space for its installation, making it a perfect choice for limited space applications. In addition, it is also used for military and aerospace equipment where precision power supply is essential in holding electronic components.Moreover, it is also used in chip level application since it can provide very precise power output as needed. It is often included in voltage regulator module (VRM) to stabilize the motherboard voltage, allowing it to reach the chip level of operation. It is also very popular in cellular phone application since it can provide very accurate voltage and current supply to the processor.

Working Principle

JRCW016A0R41-TZ is based on a DC step-up converter principle. It works by using an input power stage and a converter stage to convert the low-voltage, high current source into a high-voltage, low-current source. The input power stage consists of an efficient rectifier bridge, which transforms the low-voltage AC to DC. This DC is then sent to the converter stage where it is turned into a high-voltage, low-current DC source. This is achieved by using an isolated power topology circuit, which utilizes switching transistors and high frequency inductors to convert the current into the output voltage. The converter also utilizes a pulse-width modulation (PWM) technique. With this technique, a high-frequency signal is ramped up and down to adjust the mean value of the DC voltage. As a result, the voltage can be precisely controlled in a wide range of current adjustments.

Conclusion

JRCW016A0R41-TZ is an advanced high-precision DC-DC converter that provides excellent performance for its application fields. Its working principle is based on a DC step-up converter, with an input power stage and an output voltage stage that utilize PWM for current regulation. It is widely used in space industries, military and aerospace applications, as well as chip level application for cellular phones and regulators.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description