JTL4048S3V3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The JTL4048S3V3 is a DC DC converter, specifically designed to allow higher input voltage applications. It provides a regulated output of 3.3V from an input voltage of 4.0 to 40 volts. The converter supports up to 0.5A of continuous output current. This unit is a step-down converter that maintains a relatively constant output voltage even when subjected to varying input voltage fluctuations. The following discussion focuses on the application field and working principle of the JTL4048S3V3.

Application Field

The JTL4048S3V3 is largely used in many types of commercial and industrial applications. It is widely used in automotive applications such as automotive battery, in-car charging module, automotive computer, telephone, navigation, audio equipment, etc. It is also suitable for all kinds of computer and office equipment, such as industrial control, telecom system, audio system, notebook power supply, power adapter, etc. This device is also used in medical instruments, industrial equipment, home appliances and many more.

Working Principle

The JTL4048S3V3 DC DC converter provides a regulated 3.3V output voltage from an input voltage range of 4 to 40V. It employs a synchronous rectification step-down or buck switching regulator topology with an internal high-frequency switching current mode pulse-width-modulated (PWM) control. The input voltage is applied to the converter, then rectified with two pairs of Schottky diodes D1 and D2. However, one of the diodes is paralleled with the high-side switch (SW1) to improve the system efficiency. Then, the voltage is further reduced to a preset voltage by the internal control and buck switching loop of the converter.

The PWM control circuit, composed of Pulse-width Modulator IC1 and current sensing resistor R2, measures the current through the inductor L1. As current is increasing, pulse width is decreases and the output voltage is regulated to the set value. The output voltage is the sum of the schottky diode voltage dropped between input and output, and the voltage of inductor reactance between input and output. The output is then filtered by the output capacitor C2 to improve the ripple voltage.

The converter has several protection features, such as overload, short circuit, over-temperature and over voltage protection. These features are all enabled through the integrated circuit (IC1). Overload protection is enabled by the OCP circuit. The short circuit protection cuts off the output when the switch of the converter is off. The over-temperature protection is implemented by monitoring the junction temperature of the IC1. For the over voltage protection, only a certain voltage higher than the rated voltage is allowed, and the output is disabled when the voltage exceeds the limit.

In conclusion, the JTL4048S3V3 is a DC-DC converter with advantages of wide input voltage range, good efficiency, and high protection capability. It is suitable for a wide range of applications such as automotive and industrial applications. It is an ideal choice for a variety of design needs.

The specific data is subject to PDF, and the above content is for reference