K2000EH70RP2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors are devices used primarily in power-switching circuits. The K2000EH70RP2 is a type of semiconductor thyristor that is used in AC circuits and power-switching circuits to protect against excessive current. It is designed for use in industrial applications and incorporated into AC circuits, allowing for precise control over AC power in an efficient manner.

The K2000EH70RP2 is a type of DIAC, or diode-conducting alternating current. It is composed of two electrodes, the anode and cathode, that are embedded in semi-conductor material which is the main component of DIs. When a voltage is applied to the anode and the cathode, it will turn on and passes current in one direction. When the voltage is removed, the current will no longer pass and the DIAC is off again.

The K2000EH70RP2 works by controlling the amount of current that flows to the load in an AC circuit. This is done by applying a specific voltage to the anode and the cathode which will cause the diode to switch on and off, bypassing the load, in order to prevent the circuit from being overloaded. The design of the DIAC also enables it to switch on and off at different times, allowing for precise control of the current in the circuit.

K2000EH70RP2s are typically used in AC circuits where high voltage and large current are required, such as motors and other industrial applications. It is generally used to protect the circuit from damage due to excess current or voltage, since it can be precisely controlled to prevent overloads. They are also used in power-switching circuits, where they are used to control the current that is applied to the load. This helps to ensure that all components in the circuit are provided with the right amount of power.

As a SIDAC, or semi-insulated diode alternating current switch, the K2000EH70RP2 can also be used in applications which require the switching of electrical current in both directions. This is done by connecting the anode and cathode in series and then applying a voltage to the anode and the cathode. As the voltage is increased, the diode will turn on at a certain point and cause the current to begin flowing in one direction. When the voltage is decreased, the current will stop and reverse, allowing for precise control of the current in the circuit.

Overall, the K2000EH70RP2 is a versatile device with a variety of applications ranging from controlling current in AC circuits to power-switching circuits. Its ability to be used as either a DIAC or SIDAC allows it to provide precise control of power in an efficient and reliable manner and helps keep electrical circuits safe and functioning properly.

The specific data is subject to PDF, and the above content is for reference