K3010P

Current - On State (It (RMS)) (Max):	100mA
Approvals:	BSI, CQC, UR, VDE
Supplier Device Package:	6-DIP
Package / Case:	6-DIP (0.300", 7.62mm)
Mounting Type:	Through Hole
Operating Temperature:	-55°C ~ 100°C
Current - DC Forward (If) (Max):	80mA
Voltage - Forward (Vf) (Typ):	1.25V
Turn On Time:	--
Current - Hold (Ih):	100µA (Typ)
Series:	--
Current - LED Trigger (Ift) (Max):	15mA
Static dV/dt (Min):	10kV/µs (Typ)
Voltage - Off State:	250V
Voltage - Isolation:	5300Vrms
Number of Channels:	1
Zero Crossing Circuit:	No
Output Type:	Triac
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators - Triac, SCR Output Optoisolators with triac and SCR outputs provide electrical isolation, allowing a low voltage signal to control a high voltage circuit. The K3010P optoisolator is a high-power type designed for AC power control applications, offering a wide range of features and benefits.K3010P OptoisolatorThe K3010P optoisolator is a 4-pin device that combines a Photon Coupled Isolator (PCI) with an insulated Gate Bipolar Transistor (IGBT). It provides a high level of electrical isolation at high voltages, with high-speed switching and an operating voltage range from 400 to 700 volts AC. The device is suitable for control of high-power AC loads, including motors, pumps, HVAC, lighting, and other industrial applications.K3010P Application FieldThe K3010P optoisolator is used in a variety of applications, including motor control, relay control, switched-mode power supplies, high-voltage lighting control, heat control systems, and various AC power control applications. It is also suitable for use in applications where high isolation is required and a power level up to 10A is needed.K3010P Working PrincipleThe K3010P optoisolator consists of two circuits, a control input circuit and an output circuit. On the control input side, a low input voltage is applied which activates an LED inside the optoisolator, resulting in a light signal that is picked up by a photo-detector, converting it into an electric current. On the output side, this electric current activates a gate of the insulated Gate Bipolar Transistor (IGBT), which then turns on or off depending on the logic state of the input. By controlling the input signal, the output can be controlled, providing electrical isolation between the input and output circuits.K3010P BenefitsThe K3010P optoisolator provides a number of features and benefits, including high isolation voltage, high frequency operation, low power consumption, and low profile design. Its high isolation voltage ensures that there is no break down between input and output circuits, and its high switching frequency allows it to control high-power AC loads quickly and accurately. Its low power consumption helps to reduce power losses, and its low profile design allows it to be easily installed in tight spaces.ConclusionThe K3010P optoisolator is a high-power device designed for AC power control applications, providing a high level of electrical isolation, high-speed switching, and low power consumption. It is suitable for use in many applications, including motor control, relay control, switched-mode power supplies, and high-voltage lighting control. Its high isolation voltage, high frequency operation, low power consumption, and low profile design make it an ideal choice for these and other AC power control applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description