K50H-3C0-SE100.0

Series:	K50H-3C, Kyocera
Packaging:	Tape & Reel (TR)
Part Status:	Active
Base Resonator:	Crystal
Type:	XO (Standard)
Frequency:	100MHz
Function:	Enable/Disable
Output:	CMOS
Voltage - Supply:	3.3V
Frequency Stability:	±50ppm
Operating Temperature:	-10°C ~ 70°C
Current - Supply (Max):	40mA
Ratings:	--
Mounting Type:	Surface Mount
Package / Case:	4-SMD, No Lead
Size / Dimension:	0.276" L x 0.197" W (7.00mm x 5.00mm)
Height - Seated (Max):	0.063" (1.60mm)
Current - Supply (Disable) (Max):	10µA

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction
Oscillators are a type of electronic device commonly found in many consumer, industrial, and research applications. K50H-3C0-SE100.0 is a specific type of oscillator which can be used for a variety of different tasks. There are many different applications and working principles associated with this oscillator type. This article will provide an overview of the K50H-3C0-SE100.0 oscillator\'s application field and working principle.

Application Field of K50H-3C0-SE100.0 Oscillators
K50H-3C0-SE100.0 oscillators are capable of providing both sine and square wave output. This type of oscillator is often used for audio applications, such as producing music and sound effects. These oscillators can also be used in communication equipment and in various control systems. They are also popularly employed in medical imaging equipment, home entertainment systems, and industrial process control. Due to their versatility, K50H-3C0-SE100.0 oscillators can be used in almost any type of application.

Working Principle of K50H-3C0-SE100.0 Oscillators
K50H-3C0-SE100.0 oscillators use the principle of harmonic oscillation to generate reproducible sine and square wave outputs. This type of oscillator is capable of producing frequencies up to a maximum of 100kHz. The oscillator produces an RF signal, which is then amplified and used to generate the sine wave output. The frequency of oscillation is determined by the frequency at which the feedback loop oscillates around the set frequency. The feedback loop is made up of a capacitor, an inductor, and a resistor. When a voltage is applied to the capacitor, it produces an oscillation with a frequency determined by the capacitance and the inductance. The resistor in the feedback loop determines how much energy is dissipated as the oscillation builds up. The sine wave output is produced by a phase-locked loop. This loop consists of a phase detector, a loop filter, and an amplifier. The phase detector compares the input signal with the output signal, and sends a control signal to the loop filter and amplifier. The loop filter adjusts the frequency of the output signal to match the frequency of the input signal, and the amplifier amplifies the signal to generate the sine wave output.

Conclusion
K50H-3C0-SE100.0 oscillators have a wide range of applications in the fields of audio, communication, control systems, and medical imaging. These oscillators are capable of providing both sine and square wave outputs at frequencies up to 100kHz. The working principle of the K50H-3C0-SE100.0 oscillator is based on the principle of harmonic oscillation, using a feedback loop consisting of a capacitor, an inductor, and a resistor. The phase-locked loop is used to produce the sine wave output.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description