KAPPA-M868

Serial Interfaces:	UART, USB
Package / Case:	12-SIP Module
Operating Temperature:	-40°C ~ 85°C
Mounting Type:	Through Hole
Current - Transmitting:	28mA
Current - Receiving:	20mA
Voltage - Supply:	2.4 V ~ 3.6 V
Memory Size:	--
Utilized IC / Part:	--
Antenna Type:	Not Included
Series:	KAPPA
Sensitivity:	-121dBm (Max)
Power - Output:	13dBm (Max)
Data Rate:	56kbps
Frequency:	868MHz
Modulation:	--
Protocol:	--
RF Family/Standard:	General ISM
Part Status:	Active
Packaging:	Tray

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction
KAPPA-M868 is a high-performance RF Transceiver Module designed for low-cost remote control applications. It features a compact, integrated system-on-chip with integrated RF Transceiver, current supply and low cost operation. The flexibility of the control and data control interface makes it suitable for a wide range of applications from basic remote control to advanced networking applications. It supports both open and closed loop operation and data speeds up to 250 kbit/s. In addition, it also features several hardware and software security measures to protect the transceiver and design against potential attacks.
Application Field
KAPPA-M868 is widely used in low cost remote control applications. Typical applications include remote control of electric vehicles, industrial control and sensing devices such as temperature controllers, security systems, building automation and home automation. It is suitable for both industrial and consumer products. In addition, KAPPA-M868 can be used for radio application such as Amateur radio, Low Power Radio (LPR), Military-grade radios, Wireless sensor networks and connected home application.
Working Principle
The working principle of KAPPA-M868 is based on a closed-loop architecture. The radio communication link is established by a base station device that sends out a carrier signal, which is received by the KAPPA-M868 transceiver. The transceiver then modulates the signal in one or more of the following ways: Single tone, Frequency Shift Keying (FSK), Amplitude Shift Keying (ASK) or On-Off Keying (OOK). The modulated signal is converted back to digital signal by an onboard digital signal processor (DSP) for further processing. The DSP then extracts the digital information from the signal and sends it back to the base station. Finally, the base station uses this information to control the device. This closed-loop architecture ensures that only the intended device responds to the transmitted signal, and that no other device can access the information.
Conclusion
KAPPA-M868 is a high-performance, low-cost RF Transceiver Module designed for use in low cost remote control applications. It is suitable for industrial and consumer products, as well as a wide range of radio applications. Its closed-loop architecture ensures that only the intended device responds to the transmitted signal, and that no other device can access the information. With its compact design and integrated system-on-chip, KAPPA-M868 is an ideal choice for cost effective remote control applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description