KBL404G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

In the field of electronics, Bridge rectifiers are a type of diode used to convert alternating current (AC) to direct current (DC). A bridge rectifier is a collection of four or more diodes in a bridge circuit configuration that provides the same output polarity for either polarity of input voltage. Among the various bridge rectifier models, the KBL404G is a full wave rectifier that features a forward voltage drop of 0.35V max at IF = 5.0A and reverse recovery time of 100ns max. It is suitable for high volume permanent installation in large DC applications.

The KBL404G bridge rectifier consists of a series arrangement of four diodes connected to form a bridge-like circuit. This signified arrangement allows the rectifier to convert AC to DC. For example, consider a 120V AC power supply. When passed through the bridge rectifier, the applied voltage at the bridge rectifier output is the absolute value of the AC voltage, or in this case, 120V. Essentially, the diodes will conduct current in alternate cycles and the average output voltage is the absolute value of the applied AC voltage.

When conducting, a diode is essentially a one way valve, allowing current to pass only in one direction. For a single pulse of alternating current, two diodes theoretically need to be connected back-to-back in order to create a rectifier. In the KBL404G bridge rectifier, the four diodes connected in a bridge configuration allows current to flow in both directions, allowing full wave AC-to-DC conversion. The bridge rectifier works on the same principal of a full wave rectifier, with two halfcycles of the input AC passing through it in alternate directions for the full cycle of AC. This causes the output to be DC, having both a positive and a negative cycle each time.

One of the main application of the KBL404G is to be used as a DC power supply, rectifying and filtering the incoming AC power. This rectified power then passes through a low pass filter which eliminates the high frequency AC components of the rectified wave, leaving behind a pure DC power supply. The bridge rectifier can also be used to build a high power DC motor controller, such as for motorcycles or golf carts. This would require the rectified power to then be passed through a voltage regulator, controlling the output DC voltage and preventing overvoltage. The KBL404G can also be used in power supplies for LED lighting applications.

In conclusion, the KBL404G bridge rectifier is a four diode rectifier that is used to convert AC to DC. The bridge rectifier works based on the principle of a full wave rectifier, with alternating current passing through the bridge in alternate directions to create a direct current. The KBL404G has a wide range of applications, most notably in power supplies and motor controllers and in LED lighting applications.

The specific data is subject to PDF, and the above content is for reference