KC2016K11.2896C1GE00

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators

KC 2016K11.2896C1GE00 is a type of oscillator. An oscillator is an electronic circuit that generates a continuous alternating signal waveform. Oscillators are used in a variety of applications to create a periodic signal with a stable frequency and amplitude. The types of oscillators employed vary greatly based on the purpose of the application and the desired characteristics of the generated waveform.

Application Field

Oscillators have a wide range of applications, from creating a square waveform for logic circuits through to creating radio frequency signal for transmitters and receivers. Though many applications only require the oscillator to generate a sine waveform, most applications will require the waveform to be digitally modulated, meaning the output waveform itself can change with time. KC 2016K11.2896C1GE00 oscillator chip is designed for bidirectional communication. Therefore, it could be used in fields such as driver circuits, communication, pulse generation, computer peripherals, and consumer electronics. In general, oscillators are used in a variety of applications when a precise frequency is required.

Working Principle

KC 2016K11.2896C1GE00 oscillator chip is a bipolar integrated circuit. Basically, it the chip works based on a principle of negative feedback, in which a part of the output is fed back to the input. when a signal is fed through an inverting amplifier, the output will be the opposite of the input. The output of the inverting amplifier is then compared to a reference voltage (typically a sawtooth waveform), and any difference is fed back to the input. The amplifier is then connected to the output buffer. The resulting waveform ultimately has stable frequency and amplitude as the reference voltage. The reference voltage is usually adjustable, so the output frequency can be changed in a short amount of time.

In a nutshell, an oscillator requires an amplifier with some form of negative feedback, where a part of the output is fed back to the input. This type of negative feedback is essential for generating a stable output waveform. KC 2016K11.2896C1GE00 oscillator chip specifically uses an amplifier with a voltage feedback, which enables the chip to more accurately control the output frequency. The chip is also designed to be bidirectional, which further adds to its many applications.

The specific data is subject to PDF, and the above content is for reference