KC2016K75.0000C1GE00

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are electrical circuits that convert direct current to alternating current. An oscillator like the KC2016K75.0000C1GE00 produces a sinusoidal waveform never drops in zero voltage, so significantly reduces switching losses.

Application Field

The KC2016K75.0000C1GE00 oscillator is a type of electronic oscillator commonly used in low-voltage systems, such as consumer electronics, automotive systems and home appliances. This type of oscillator is also frequently used in consumer grade power supplies, DC-DC converters and switching power supplies. In addition, it is used to synchronize high speed data transmission standards like 3G, Wifi, Ethernet, etc. The oscillator’s primary applications are found in communications, medical technology, test and measurement, and industrial automation and control.

Working Principle

The working principle of the KC2016K75.0000C1GE00 oscillator is based on a crystal oscillator circuit. An oscillator consists of a few components – a crystal, an amplifier, and a feedback loop. The crystal acts as an electronic resonator that produces a sinusoidal signal at its desired frequency. The amplifier provides the gain required to achieve the desired amplitude of the signal. The feedback network connects the output of the amplifier back to the input to form a loop with the crystal, enabling the oscillator to create an output at a fixed frequency.

For the KC2016K75.0000C1GE00 oscillator, the oscillation frequency is determined by the characteristics of the crystal. When the crystal vibrates at the intended frequency, it reduces the energy needed for maintaining the same frequency, resulting in reduced total harmonic distortion and improved switching efficiency. This oscillator can operate at voltage levels up to 14V, and can in some cases go up to 75V.

The KC2016K75.0000C1GE00 oscillator is used for low power, single frequency applications and is based on a low-noise, low-power-consumption design. It has a standard output voltage, a wide operating range of 0.75 to 100MHz, and a low temperature coefficient. This oscillator is therefore suitable for rapid signal transmission in powered devices and other consumer grade applications.

In conclusion, the KC2016K75.0000C1GE00 oscillator is a type of electronic oscillator suitable for low-voltage systems. It works on a crystal oscillator circuit with a crystal, amplifier and feedback loop, and provides a sinusoidal waveform at a fixed frequency. This oscillator can operate at high voltage levels up to 14V and has a wide frequency range of 0.75 to 100MHz. Applications of the oscillator can be found in communications, medical technology, test and measurement, and industrial automation and control.

The specific data is subject to PDF, and the above content is for reference