KC2520K8.00000C10E00

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Oscillators are devices that produce periodic, repeating waveforms of electronic signals. These waveforms are frequently used as timing references in electronic circuits, where accuracy and stability of the waveform frequency are critical parameters. One such oscillator device is the KC2520K8.00000C10E00, and this article will discuss its application field, and the basic working principle of the device.

The KC2520K8.00000C10E00 oscillator is typically used where an accurate and reliable signal source is required. This type of device has an operating frequency range of 25 to 40 MHz, with an typical operating frequency of 27.5 MHz. The rating for the output power is typically between 14 and 28 dBm and the fall time is 10 ns or less. The device features an on-chip voltage regulator, which allows for the voltage level of the output signal to remain constant. The maximum output voltage swing for the device is typically 5V, and the minimum output voltage is typically 0.6V.

The working principle of the KC2520K8.00000C10E00 oscillator is based on a negative-resistance oscillator circuit. This type of circuit consists of an amplifier in conjunction with a transistor or other active device. The amplifier is usually negative-feedback based, and the active device provides the negative resistance element. The negative resistance causes the circuit to oscillate in a negative feedback cycle, resulting in a periodic output signal. The frequency of oscillation is determined by the components chosen in the amplifier circuit.

The specific topology of the KC2520K8.00000C10E00 oscillator circuit consists of a differential amplifier with a current-feedback compensation network. This type of network has a small number of active components, providing the advantages of low current consumption and fast start-up time. Additionally, the circuit design provides a high output signal-to-noise ratio, and wide open-loop gain for optimal stability of the operating frequency. The output waveform can be configured as either a sine wave or a square wave, depending on the application.

In summary, oscillators are an important component in many electronic applications, and the KC2520K8.00000C10E00 oscillator offers an ideal solution for those requiring an accurate and stable signal. With an operating frequency range of 25 to 40 MHz, and an output power rating of 14 to 28 dBm, the device is ideally suited for applications requiring precise timing. The working principle of this oscillator is based on a negative-resistance oscillator circuit, which provides a fast start-up time, low current consumption, and optimal stability of the operating frequency. The output waveform of the device can also be configured to a sine wave or a square wave.

The specific data is subject to PDF, and the above content is for reference