Allicdata Part #: | KCJ-V-ND |
Manufacturer Part#: |
KCJ-V |
Price: | $ 362.74 |
Product Category: | Uncategorized |
Manufacturer: | Eaton |
Short Description: | BUSS CABLE LIMITER |
More Detail: | N/A |
DataSheet: | KCJ-V Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 329.76700 |
Series: | * |
Part Status: | Active |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
KCJ-V stands for “Kabuki Compression Jaw Valve”, which has become increasingly popular in various industrial and household applications ranging from controlling water flow to fluid management. KCJ-V is a type of valve designed for controlling the flow of liquids, gases, and other materials in pipelines. Furthermore, the KCJ-V can be used in a wide range of closed systems, including gas cylinder, vaporizers, and general-purpose regulation. To further understand the application field and working principle of the KCJ-V, an analysis of the following components will be conducted: construction, function and operation, and design.
Construction
The most common materials used in KCJ-V are cast iron, stainless steel, and polymers. Cast iron offers excellent toughness, rigidity, temperature, and corrosion resistance, making it a perfect choice for building a KCJ-V. On the other hand, stainless steel offers exceptional corrosion resistance. It is more expensive than cast iron, but is usually preferred for applications that require a higher level of corrosion resistance. Finally, polymers are becoming increasingly popular for use in the construction of valves. They are shatter-resistant, have better heat resistance, reduce friction, and are cost-effective.
Function and Operation
When activated, the KCJ-V works as a check valve. It opens or closes depending on the flow of liquid or gas. The valve includes a sliding jaw, which has a chamber formed between two sections. When a pressure drop is detected, the force of component gas in the chamber increases and thus the jaw moves to the other side. This movement opens the valve, allowing flow through the valve. On the other hand, when the pressure differential is positive, the jaw moves back to the original position, thus cutting off the flow.
Design
The design of the jaw valve is very simple. The main body is made up of three parts: a macropore, a micropore, and a central ball. These three components work together as a single unit to regulate liquid flow. The macropore is the largest component of the jaw valve. It is responsible for opening and closing the valve, thus controlling the flow. The micropore is responsible for the fine-tuning of the flow. It allows for a more precise control of flow. Finally, the central ball is the pressure regulator. It is responsible for altering the pressure within the valve, thus allowing for a more regulated flow.
In summary, the KCJ-V is a useful tool for controlling liquid and gas flow in pipelines. Its design is simple yet effective. Its construction is made using cast iron, stainless steel, and polymers, to provide increased corrosion resistance, better heat resistance, and reduced friction. When activated, the valve opens or closes depending on the flow of liquid or gas to regulate the pressure within the system. Thus, the KCJ-V is an ideal choice for controlling and managing the flow of liquids and gases.
The specific data is subject to PDF, and the above content is for reference
DIODE GENERAL PURPOSE TO220
CB 6C 6#16 SKT RECP
CA08COME36-3PB-44
CA-BAYONET
CB 6C 6#16S SKT PLUG
CAC 3C 3#16S SKT RECP LINE