KMZ1608RHR601ATD25 Filters |
|
Allicdata Part #: | 445-175002-2-ND |
Manufacturer Part#: |
KMZ1608RHR601ATD25 |
Price: | $ 0.03 |
Product Category: | Filters |
Manufacturer: | TDK Corporation |
Short Description: | FERRITE BEAD 600 OHM 0603 1LN |
More Detail: | N/A |
DataSheet: | KMZ1608RHR601ATD25 Datasheet/PDF |
Quantity: | 4000 |
4000 +: | $ 0.02495 |
8000 +: | $ 0.02356 |
12000 +: | $ 0.02218 |
28000 +: | $ 0.02148 |
100000 +: | $ 0.02010 |
Series: | KMZ-HR |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Filter Type: | Signal Line |
Number of Lines: | 1 |
Impedance @ Frequency: | 600 Ohms @ 100MHz |
Current Rating (Max): | 500mA |
DC Resistance (DCR) (Max): | 400 mOhm |
Ratings: | AEC-Q200 |
Operating Temperature: | -55°C ~ 150°C |
Package / Case: | 0603 (1608 Metric) |
Mounting Type: | Surface Mount |
Height (Max): | 0.037" (0.95mm) |
Size / Dimension: | 0.063" L x 0.032" W (1.60mm x 0.80mm) |
Features: | Soft Termination |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Ferrite beads and chips are an electronic component that uses a ceramic material to achieve a certain electronic and magnetic effect. The KMZ1608RHR601ATD25 chip is a kind of ferrite bead, with a rated voltage of 10 V and a rated current of 1.3A. It is mainly used for signal line and power line protection and EMI suppression.
The construction of a ferrite bead thus consists of a cylindrical magnetic core made of ferrite material, which is then wound with an insulated copper wire. The wire is connected on the two ends to the terminals of the bead. An air gap in the core increases and decreases the inductance, which is also helpful in increasing the resistance.
The application field of KMZ1608RHR601ATD25 ferrite bead is mostly on mobile phones and their related products, small and low-power appliances, IT equipment, cars, medical equipment, ships, etc., mainly used for chip signal lines and power lines protection, EMI suppression.
Tne working principle of the KMZ1608RHR601ATD25 chip is through the choke coils inside the chip, the choke coils can effectively reduce the capacitive coupling between the signal lines and the power lines. The contact of the choke coil on the signal line and the power line will increases the inductance of the circuit so that it can reduce the interference between the signal line and the power line. This can protect the signal line and power line and prevent EMI.
In order to ensure that the effect of KMZ1608RHR601ATD25 chip is effective, the chip should meet the following requirements:
- The frequency range must be consistent with the frequency characteristics of the chip.
- Make sure the chip package in good condition.
- Pay attention to the rated current of the chip, it should not be overloaded.
- Check the board to minimize parasitic inductance.
In summary, the application field of the KMZ1608RHR601ATD25 ferrite bead is mainly for signal line and power line protection and EMI suppression, especially in mobile phones and their related products, small and low-power appliances, IT equipment, cars, medical equipment, ships, etc. Its working principle is through the choke coils inside the chip to reduce the capacitive coupling between the signal lines and the power lines, thus protect the signal line and power line and prevent EMI.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
KMZ1608RHR102ATD25 | TDK Corporat... | 0.03 $ | 1000 | FERRITE BEAD 1 KOHM 0603 ... |
KMZ1608DHR121CTDH5 | TDK Corporat... | 0.03 $ | 1000 | FERRITE BEAD 120 OHM 0603... |
KMZ1608SHR121ATD25 | TDK Corporat... | 0.03 $ | 1000 | FERRITE BEAD 120 OHM 0603... |
KMZ1608BHR102CTD25 | TDK Corporat... | 0.03 $ | 20000 | FERRITE BEAD 1 KOHM 0603 ... |
KMZ1608AHR252BTD25 | TDK Corporat... | 0.03 $ | 1000 | FERRITE BEAD 2.5 KOHM 060... |
KMZ1608RHR600ATD25 | TDK Corporat... | 0.03 $ | 4000 | FERRITE BEAD 60 OHM 0603 ... |
KMZ1608RHR121ATD25 | TDK Corporat... | 0.03 $ | 4000 | FERRITE BEAD 120 OHM 0603... |
KMZ1608RHR601ATD25 | TDK Corporat... | 0.03 $ | 4000 | FERRITE BEAD 600 OHM 0603... |
KMZ1608SHR601ATD25 | TDK Corporat... | 0.03 $ | 4000 | FERRITE BEAD 600 OHM 0603... |
KMZ1608SHR102ATD25 | TDK Corporat... | 0.03 $ | 4000 | FERRITE BEAD 1 KOHM 0603 ... |
KMZ1608YHR600BTD25 | TDK Corporat... | 0.03 $ | 4000 | FERRITE BEAD 60 OHM 0603 ... |
KMZ1608YHR121BTD25 | TDK Corporat... | 0.03 $ | 4000 | FERRITE BEAD 120 OHM 0603... |
KMZ1608YHR301BTD25 | TDK Corporat... | 0.03 $ | 4000 | FERRITE BEAD 300 OHM 0603... |
KMZ1608YHR601BTD25 | TDK Corporat... | 0.03 $ | 4000 | FERRITE BEAD 600 OHM 0603... |
KMZ1608YHR102BTD25 | TDK Corporat... | 0.03 $ | 4000 | FERRITE BEAD 1 KOHM 0603 ... |
KMZ1608YHR152BTD25 | TDK Corporat... | 0.03 $ | 4000 | FERRITE BEAD 1.5 KOHM 060... |
KMZ1608DHR500CTDH5 | TDK Corporat... | 0.03 $ | 4000 | FERRITE BEAD 50 OHM 0603 ... |
KMZ1608DHR241CTD25 | TDK Corporat... | 0.03 $ | 4000 | FERRITE BEAD 240 OHM 0603... |
KMZ10B,112 | NXP USA Inc | 0.0 $ | 1000 | SENSOR LINEAR ANALOG SOT1... |
KMZ10C,112 | NXP USA Inc | 0.0 $ | 1000 | SENSOR LINEAR ANALOG SOT1... |
FERRITE BEAD 150 OHM 1206 1LN
FERRITE BEAD 60 OHM 0402 1LN
FERRITE BEAD
FERRITE BEAD
FERRITE BEAD
FERRITE BEAD