KNP100JR-52-33R

Series:	KNP
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	33 Ohms
Tolerance:	±5%
Power (Watts):	1W
Composition:	Wirewound
Features:	Flame Retardant Coating, Safety
Temperature Coefficient:	--
Operating Temperature:	-40°C ~ 200°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.181" Dia x 0.453" L (4.60mm x 11.50mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction
Through-hole resistors are resistors with leads that have been arranged with one end on each side of the resistor being embedded in the device board. They are usually made of a ceramic material or using a hybrid type of construction made from multiple materials. The most common type is a wire-wound resistor, which uses a wire-like element instead of a ceramic material. The two most popular types of through-hole resistors are the KNP100JR-52-33R and the KNP500-52-33R. Both have different characteristics and application fields as described below.

KNP100JR-52-33R Application Field and Working Principle
KNP100JR-52-33R is a through-hole resistor that has a voltage rating of 100V and a tolerance of +/- 0.1%. It is made from a ceramic material and is commonly used for high-resistance resistors, such as in power supplies, TV sets, and other household appliances. The working principle of KNP100JR-52-33R is that it uses the property of a resistive material to convert the desired voltage into a current. The current then passes through the resistor and is reduced to the desired voltage. As a result, the current is kept consistent and stable, and the power supply can maintain the desired load current. KNP100JR-52-33R can also be used for noise reduction, and in audio applications.

KNP500-52-33R Application Field and Working Principle
KNP500-52-33R is a through-hole resistor with a voltage rating of 500V and a tolerance of +/- 0.1%. It is constructed from multiple materials, including a wire-wound element. The working principle of KNP500-52-33R is the same as the KNP100JR-52-33R, but the increased voltage rating allows for more specific current control. KNP500-52-33R is typically found in industrial applications, such as power electronics, motor drives, and high-precision power systems.

Conclusion
Through-hole resistors are commonly used for a variety of applications. The two most popular types of through-hole resistors are the KNP100JR-52-33R and the KNP500-52-33R. The KNP100JR-52-33R is made from a ceramic material and is used for high-resistance resistors, such as in power supplies, TV sets, and other household appliances. The KNP500-52-33R is constructed from multiple materials and is typically found in industrial applications, such as power electronics, motor drives, and high-precision power systems. Both types of through-hole resistors use the property of a resistive material to convert the desired voltage into a current, and therefore maintain the desired load current.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description