KNP100JR-73-200R

Series:	KNP
Packaging:	Tape & Reel (TR)
Part Status:	Active
Resistance:	200 Ohms
Tolerance:	±5%
Power (Watts):	1W
Composition:	Wirewound
Features:	Flame Retardant Coating, Safety
Temperature Coefficient:	±300ppm/°C
Operating Temperature:	-40°C ~ 200°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.181" Dia x 0.453" L (4.60mm x 11.50mm)
Height - Seated (Max):	--
Number of Terminations:	2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors: KNP100JR-73-200R Application Field and Working Principle

Through hole resistors are resistors that are used in the production of circuit boards. They are designed to provide electrical isolation to components in circuit boards and provide a low-impedance path to ground. Through hole resistors are primarily used in high-speed modern electronic devices, as they provide good electrical insulation and noise immunity. The KNP100JR-73-200R through hole resistor is one of the most popular and widely used through hole resistors, and its application field and working principle will be discussed below.The KNP100JR-73-200R through hole resistor is a type of chip component which is suitable for high-speed design of digital circuits such as ICs or FPGAs. It is a one-half inch (12.7 mm) two-layer resistive element with a thickness of 0.3 mm, and is designed for resistance values that range from 0.1Ω to 200Ω. It is suitable for applications such as current limiting, voltage dividing, and signal conditioning of both analog and digital signals. The KNP100JR-73-200R through hole resistor is also commonly used in combination with other components, such as filters, potentiometers, and diodes, to obtain improved performance.The working principle of the KNP100JR-73-200R through hole resistor is based on the fact that when it is connected to a positive and a negative voltage source, the electrical current that passes through it is proportional to the difference between these two voltage sources. This is known as Ohm\'s law and can be represented as V = I × R, where V is the voltage difference, I is the current, and R is the resistance of the component. When the resistance is increased, the current through the resistor is reduced, resulting in a voltage drop across the resistor.The KNP100JR-73-200R through hole resistor can also be used to protect sensitive electronic components from voltage and current over-spikes. When an over-spike occurs, the resistor acts as a barrier and absorbs the excess current, thereby protecting the other components from damage. This is due to the fact that the voltage across the resistor is much lower than the voltage across other components, and therefore it can absorb the excess current without causing any damage.In summary, the KNP100JR-73-200R through hole resistor is a chip component that is used in the production of circuit boards. Its application field includes current limiting, voltage dividing, and signal conditioning of both analog and digital signals. Furthermore, its working principle is based upon Ohm\'s law, which states that the voltage across the resistor is proportional to the difference between the two voltage sources. Lastly, it can also be used to protect sensitive components from over-spikes.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description