KNP1WSJB-52-5R6

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thru-hole resistors are resistors that feature long cylindrical bodies with pins on each side. The pins are usually press-fitted into the board holes for reliable electrical connection. The pins also provide mechanical support so that the resistor can withstand vigorous vibrations and movement. The most commonly used thru-hole resistor is the KNP1WSJB-52-5R6. It features an operating temperature of -55℃ to +170℃ and is capable of withstanding up to ±2% tolerance, ±2mV offset voltage, and ±1% to ±5% variation.

KNP1WSJB-52-5R6 thru-hole resistors are suitable for use in a variety of different applications. For instance, these resistors can be used for voltage sensing, current sensing, power measurement, signal conditioning, load balancing, and protection from destructive voltage and current loads. They are also used in medical, automotive, consumer electronics, aerospace, and military applications. KNP1WSJB-52-5R6 resistors are available in different wattages, packages, tolerance, and power ratings that can be tailored to the specific needs of the application.

The working principle of KNP1WSJB-52-5R6 thru-hole resistors is based on the fact that electric current is proportional to the applied voltage. Resistance decreases as an applied voltage increases. Inversely, resistance increases as an applied voltage decreases. The resistance of a KNP1WSJB-52-5R6 resistor is determined by the physical features of the material used in its construction. The properties of the materials used to manufacture the resistor will also affect its performance.

The KNP1WSJB-52-5R6 thru-hole resistor is constructed with a metal oxide layer to facilitate conduction of electricity. The oxide layer is typically made out of silicone and is coated with a resistive material. The resistive material is chosen based on the application and requirements for the resistor. For instance, a high wattage resistor may be constructed from high-temperature ceramic to maintain its performance in high heat applications. Low wattage resistors may be constructed from metal-film resistors to provide higher resistance.

The KNP1WSJB-52-5R6 thru-hole resistor is a popular through-hole component due to its reliable performance and convenient installation. By understanding the applications and working principle of these resistors, designers can optimize their systems and develop more efficient design solutions.

The specific data is subject to PDF, and the above content is for reference