KNP1WSJT-52-1R5

Series:	KNP
Packaging:	Tape & Box (TB)
Part Status:	Active
Resistance:	1.5 Ohms
Tolerance:	±5%
Power (Watts):	1W
Composition:	Wirewound
Features:	Flame Retardant Coating, Safety
Temperature Coefficient:	±300ppm/°C
Operating Temperature:	-40°C ~ 200°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.138" Dia x 0.354" L (3.50mm x 9.00mm)
Height - Seated (Max):	--
Number of Terminations:	2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors - KNP1WSJT-52-1R5 Application Field and Working Principle

Through hole resistors are used to reduce the flow of current in a circuit or system in order to control voltages or currents in a system. They provide a reliable and cost-effective way of regulating the supply of power to a circuit. KNP1WSJT-52-1R5 is a type of through hole resistor, and this article will discuss its application field and working principle.The most common application of through-hole resistors is in power circuits, where they serve to reduce current in order to reduce the risk of system overload. The KNP1WSJT-52-1R5 through-hole resistor is that it is highly durable and reliable. It is designed with the capacity to handle high temperatures and vibrations, making it suitable for use in a wide range of electronic applications.The working principle of through-hole resistors is based on the fact that electrical current runs through a circuit when there is a continuous current flow and a sufficient voltage gradient between two points. The current can be reduced by adding resistance into the circuit, and this is achieved using through-hole resistors. The KNP1WSJT-52-1R5 through-hole resistor is designed with a consistent fixed resistance, meaning that it is able to reduce the amount of current in the circuit without any further alterations being made to the system.The KNP1WSJT-52-1R5 through-hole resistor is based on an integrated circuit design, with a metal layer and resistive layer that are able to maintain a continuous resistance in the device. The metal layer provides electrical isolation to ensure that there is a consistent resistance across the entire resistor. The resistive layer is made from a material with a predetermined value, meaning that the value of the resistor does not change even if the temperature or voltage changes.When using the KNP1WSJT-52-1R5 through-hole resistor, the resistor should be connected to a solder pad on the PCB. The resistor should then be soldered onto the pad in order to ensure a secure connection, with care taken to ensure that the soldering is even and there are no cold joints or gaps. This is important in order to ensure that the resistor does not become damaged due to thermal expansion of the solder.The KNP1WSJT-52-1R5 through-hole resistor can also be incorporated into an existing circuit design. The resistor should be placed in parallel to the other components to ensure that the total load on the circuit is not exceeded. It is important to note that the resistor should be placed as close as possible to the power source to ensure that the voltage drop across the resistor does not exceed the rated voltage of the resistor.The KNP1WSJT-52-1R5 through-hole resistor is a reliable and cost-effective device, and it is designed to provide protection against voltage and current fluctuations in power circuits. It is highly durable and suitable for use in a wide range of electronic applications, and it is an important component in the modern power circuit designs.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description