KNP200JT-52-75R

Series:	KNP
Packaging:	Tape & Box (TB)
Part Status:	Active
Resistance:	75 Ohms
Tolerance:	±5%
Power (Watts):	2W
Composition:	Wirewound
Features:	Flame Retardant Coating, Safety
Temperature Coefficient:	±300ppm/°C
Operating Temperature:	-40°C ~ 200°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.205" Dia x 0.610" L (5.20mm x 15.50mm)
Height - Seated (Max):	--
Number of Terminations:	2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Through hole resistors refer to resistors whose leads are actually inserted into plated holes in the printed circuit board (PCB) and soldered. This type of resistor is still very popular, but surface mount resistors are gaining more and more, with the continuous miniaturization of electronic products.A KNP200JT-52-75R is a through hole resistor. It measures 6.5mm in diameter, its overall length is 25.4mm and its tolerance rate is 5%. It has a radial leaded construction, and acts as a bridge rectifier to provide additional protection against surges, spikes and voltage fluctuations.

Application Field

The KNP200JT-52-75R can be used in numerous applications, from power supplies to battery chargers. This type of resistors can be found in most industrial electronic equipment, such as in industrial control systems, communications systems, HVAC systems, as well as in computers, medical electronics and household appliances. This is because they can provide high power capacity while still being small and relatively easy to install.This type of through hole resistor is ideal for applications that require stable, steady and reliable performance. The KNP200JT-52-75R can deliver stable, linear performance even under wide temperature range and/or varying load conditions. Moreover, it offers superior overload and short-circuit protection, low power loss, low induction and low electromagnetic interference.

Working Principle

The KNP200JT-52-75R operates by restricting the flow of an electric current. When voltage is connected across a resistor, a certain amount of electric current is allowed to pass through it. The amount of current is determined by the resistance of the resistor, which is measured in ohms. The higher the resistance, the less current is allowed to pass. The resistor has two terminals, a positive and a negative one, and the current passes between these two terminals. Depending on the type of circuit, one or both of these terminals may have voltage connected to them. This voltage is the amount of force that pushes the electron current through the resistor.The KNP200JT-52-75R operates according to a fixed resistance. This resistance, combined with the voltage of the circuit, determines the current passing through the resistor. The resistance stays constant, no matter what current or voltage is applied to the resistor. This means that it can handle a wide range of operating conditions and provide the same consistent performance.

Conclusion

The KNP200JT-52-75R is an excellent choice for applications that require reliable linear performance over a wide temperature range and varying load conditions. Its radial leaded construction allows its resistive element to perform in a rugged environment, providing superior overload and short-circuit protection, low power loss, low induction and low electromagnetic interference.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description