KNP3WSJB-52-0R75

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through-Hole Resistors, such as the KNP3WSJB-52-0R75, are commodity resistors used in a wide variety of applications. Their chief purpose is to dampen the level of current in a circuit, allowing manufacturers to tailor the levels of current to their needs and build safety mechanisms to protect circuits from damage. Below we discuss more on the application field and working principle of the KNP3WSJB-52-0R75.

Application Field of the KNP3WSJB-52-0R75

The KNP3WSJB-52-0R75 is primarily used in precision applications where accuracy and tolerances need to be observed. This is because the resistor has a very low power rating and can only operate within a very small voltage range. Its size also makes it suitable for use in smaller and more densely packed circuits, such as found in consumer electronics and medical devices. The resistor is available in standard sizes from 0.125W to 4W and can easily be integrated into a variety of circuit designs.

Additionally, the resistor is often used in critical temperature control applications as it is highly resistant to temperature swings. This allows manufacturers to ensure that temperature levels do not exceed a certain threshold and that certain elements remain within an acceptable range. As such, these resistors are an integral part of temperature controllers, thermistors, and other temperature-sensitive devices.

Working Principle of the KNP3WSJB-52-0R75

The KNP3WSJB-52-0R75 is a resistive device which operates by dampening the electrical current in a circuit. It does this by ‘resisting’ the flow of current, creating a resistance which limits the level of current that is able to pass through it. This is done by the positioning of two conductive plates, one on either side of a fragile insulating material. As voltage is increased, current is also increased and the resistance of the resistor is decreased.

The amount of resistance created is indicated by the KNP3WSJB-52-0R75’s resistance value. This value is typically expressed in Ohms, which describes the amount of current the resistor will allow to flow with a given amount of voltage. For example, a 1K Ohm resistor would allow 1mA of current to flow with 1V of voltage.

This principle ensures that the precise amount of current is allowed to pass through the resistor, with any excess current being blocked. This makes the resistor an essential safety component and allows manufacturers to tailor the current level to the needs of the device. Furthermore, the tighter tolerances of the KNP3WSJB-52-0R75 ensures that this safety is not compromised.

In short, the KNP3WSJB-52-0R75 is a through-hole resistor primarily used in precision applications due to its low power rating and small size. Its resistance is based on the principle of dissipating current by creating a resistance that limits the amount of current that flows through a given voltage. This makes it an important component in temperature controllers and other applications where accuracy and precision are critical.

The specific data is subject to PDF, and the above content is for reference