KNP400JT-52-5R6

Series:	KNP
Packaging:	Tape & Box (TB)
Part Status:	Active
Resistance:	5.6 Ohms
Tolerance:	±5%
Power (Watts):	4W
Composition:	Wirewound
Features:	Flame Retardant Coating, Safety
Temperature Coefficient:	±300ppm/°C
Operating Temperature:	-40°C ~ 200°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.256" Dia x 0.689" L (6.50mm x 17.50mm)
Height - Seated (Max):	--
Number of Terminations:	2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction

Through hole resistors are among the most common types of resistors in use today. The KNP400JT-52-5R6 is a through hole resistor with a resistance value of 5 Ohms and an operating power of 400 mW. It is a reliable and cost-effective resistor that is suitable for a wide variety of applications. In this article, we\'ll take a closer look at the KNP400JT-52-5R6, exploring its application field and its working principle.

Application Field

The KNP400JT-52-5R6 is a versatile resistor that can be used in a wide variety of applications. It can be used in both analog and digital circuits, where it can be used to set specific voltage or power levels and to limit current. It is often used in power supplies, amplifiers, signal generators, and even computer systems for voltage regulation and signal level control. The KNP400JT-52-5R6 is also commonly used in motor speed control circuits. In these circuits, the resistor is used to limit the current to the motor, while the voltage is set by the adjustable voltage regulator. This allows for precise control over the speed and power output of the motor.

Working Principle

The KNP400JT-52-5R6 works on the same basic principle as other standard through hole resistors. It is made up of a metal wire loop that has been cut and bent into a spiral shape. This creates the material’s resistance to electrical current. When electrical current is applied to the wire loop, the resistance of the material comes into play, limiting the flow of current. The resistance value of the KNP400JT-52-5R6 is determined by the thickness of the wire loop and the number of turns that it contains. The greater the thickness of the wire loop and the more turns it has, the higher its resistance value will be. The resistance value of the KNP400JT-52-5R6 is 5 Ohms, meaning that it will limit the current flow to 5 Amp when a voltage of 1 Volt is applied.

Conclusion

The KNP400JT-52-5R6 is a reliable and cost-effective through hole resistor with a fixed resistance value of 5 Ohms and an operating power of 400 mW. It is suitable for a wide variety of applications, including power supplies, amplifiers, signal generators, motor speed control circuits, and other analog and digital circuits. The resistor works on the same basic principle as other through hole resistors, utilizing a metal wire loop that has been cut and bent in a spiral shape to create its resistance to electrical current.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description