KNP5WSJR-73-750R

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through hole resistors are widely used for various purposes in electronic circuits and systems. The KNP5WSJR-73-750R is a common type of through hole resistors and its application field and working principle are important to understand. This article will provide a brief introduction to these topics.

Through hole resistors are resistors that are mounted on a printed circuit board or insert into any other kind of socket for electrical connection. The KNP5WSJR-73-750R is a 0.5W through hole resistor, designed for general purpose applications. This type of resistor has a standard E-16 size, which allows it to be soldered to a printed circuit board or inserted into other types of sockets. The resistor is made from a ceramic material and its surface finish is Nickel-Tin-Aluminum alloy.

The resistance value of the KNP5WSJR-73-750R is determined by two factors. First, the size of the resistor. The larger the size of the resistor, the higher the resistance value will be. Second, the resistance material used. This type of resistor uses Nickel-Tin-Aluminum alloy, which provides a relatively high resistance at a low temperature. In addition, this type of resistor has a low thermal coefficient, meaning that the resistance value does not change significantly with temperature changes.

In terms of application field, the KNP5WSJR-73-750R resistor is mainly used as a part of electrical circuits which require a low resistance at high temperatures. It is suitable for various power converter applications, for example in AC-DC adaptors, power supplies, and automotive electronics. Moreover, this type of resistor is also being used in consumer electronics such as cell phones, laptop chargers, etc.

As for the working principle, the KNP5WSJR-73-750R resistor works on the principle of Ohm’s Law. This law states that the current in a circuit is proportional to the voltage difference across it. The resistor impedes the current flow, producing heat and reducing the current. The amount of current that is impeded depends on the resistance value of the resistor, which can be varied by increasing or decreasing the size or the material used.

In conclusion, the KNP5WSJR-73-750R is a 0.5W through hole resistor that is made from ceramic material with a Nickel-Tin-Aluminum alloy surface finish. It is used in power converter applications, as well as consumer electronics and automotive electronics. The resistor works on the principle of Ohm’s Law, and the resistance value can be varied by adjusting the size or material used. Through hole resistors, like the KNP5WSJR-73-750R, allow for greater design flexibility for electronics engineers.

The specific data is subject to PDF, and the above content is for reference