KNP700JB-91-4R3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through-hole resistors (THRs) are resistors that are mounted through a hole in a PCB. THRs are common components used in electronic circuits and are often used to provide power, ground, signal connections, or provide additional decoupling. They can be used to limit current, protect components from over-current, and also to reduce EMI (electromagnetic interference).

KNP700JB-91-4R3 is a Through Hole Resistor that can be used for many applications. This particular component has a minimum resistance value of 0.14 ohms and a maximum resistance value of 1.79 ohms. It is an Axial Lead Resistor with 4 Mounting Holes and is rated for voltage up to 250 volts.

The KNP700JB-91-4R3 application field and working principle involves the use of electricity. In an electronic circuit, the application field and working principle of this resistor typically involves providing the electrical current with a certain amount of resistance. This resistance prevents a current from flowing above a certain limit and protects circuits or components from being damaged.

One of the common uses of the KNP700JB-91-4R3 resistor is to reduce the amount of current flowing through a component and provide additional decoupling. This is done by applying a large resistance to the electrical current. This large resistance will cause the current to be limited and can also reduce interference between electronic components or devices.

The KNP700JB-91-4R3 resistor can also be used to protect components from surges in current that may cause them to fail. This type of surge protection is accomplished by using a resistor to absorb the excess energy and dissipate it to the environment without overheating the other components in the circuit.

In addition, the KNP700JB-91-4R3 can be used to limit high voltage in a circuit. High voltage can lead to component damage and can be dangerous to the user. By adding a high voltage resistor, the voltage can be limited to a safe value.

Finally, the KNP700JB-91-4R3 can also be used in applications where it is necessary to reduce EMI (electromagnetic interference). EMI is caused when two electronic components are both sending and receiving energy. By adding a resistor to these components, the EMI is reduced and allows for safer operation.

In summary, the KNP700JB-91-4R3 Through Hole Resistor is a versatile component that can be used in a variety of applications. It can be used to limit current, protect components from surges, reduce EMI, and to limit high voltage. This resistor is a valuable component for many electronic circuits.

The specific data is subject to PDF, and the above content is for reference