KNW013A0A4-88SRZ

Series:	KNW013
Packaging:	Tape & Reel (TR)
Part Status:	Obsolete
Type:	Isolated Module
Number of Outputs:	1
Voltage - Input (Min):	36V
Voltage - Input (Max):	75V
Voltage - Output 1:	5V
Voltage - Output 2:	--
Voltage - Output 3:	--
Current - Output (Max):	13A
Power (Watts):	65W
Voltage - Isolation:	2.25kV
Applications:	ITE (Commercial)
Features:	Remote On/Off, OCP, OTP, OVP, UVLO
Operating Temperature:	-40°C ~ 85°C
Efficiency:	91%
Mounting Type:	Surface Mount
Package / Case:	Module
Size / Dimension:	1.30" L x 0.90" W x 0.40" H (33.0mm x 22.9mm x 10.2mm)
Control Features:	Enable, Active High

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

DC DC Converters

DC DC Converters are a type of power converters that are used to convert DC voltages from one level to another. The KNW013A0A4-88SRZ is a DC DC converter that is specifically designed to operate on 5-35V DC inputs and provide 5-24V output at 5A for a wide variety of applications. This DC DC converter is highly efficient and provides good output voltage accuracy and stability.

Application Field

The KNW013A0A4-88SRZ has a wide range of applications. It can be used for powering LED lighting systems, radio electronics, and other instrumentation equipment. It can also be used for powering low-voltage devices such as small motors, relays, and switches. It is also capable of supplying power to embedded systems such as DSPs, FPGAs, and other processor-based devices.

Working Principle

The KNW013A0A4-88SRZ uses a step-down switching converter, which converts an input voltage into a lower, regulated output voltage. During operation, the device uses the input signal to charge a high frequency switching inductor. During the charging phase, the input voltage is raised to the peak voltage Vp. Then, the inductor is discharged and the output voltage is obtained.During the discharge phase, the current passes through the output capacitor and the output voltage is regulated. The device uses closed loop control to maintain the output voltage in the desired range. This control loop consists of an error amplifier, an inductor current limit, and a voltage feedback loop.The error amplifier monitors the output voltage by comparing it with a reference voltage, and sends the output signal to the output MOSFETs, which switch on or off according to the output signal. Depending on the output current demand, the output MOSFETs adjust their duty cycle and control the input and output voltages.

Conclusion

The KNW013A0A4-88SRZ is a highly efficient DC DC converterthat is designed to operate on 5-35V DC inputs and provide 5-24V output at 5A, making it well-suited for a wide variety of applications. It uses a step-down switching converter and closed loop control to maintain the output voltage in the desired range. With its high efficiency and good output voltage accuracy and stability, the KNW013A0A4-88SRZ is a reliable and cost-effective solution for powering LED lighting systems, radio electronics, and other instrumentation equipment, as well as for powering low-voltage devices such as small motors, relays, and switches.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description