Mounting Type:	Through Hole
Screw Thread:	M4.5
Torque - Screw:	1.32 Nm (11.7 Lb-In)
Screw Material - Plating:	--
Clamp Material - Plating:	Brass
Contact Material - Plating:	--
Housing Material:	--
Operating Temperature:	--
Color:	Green
Features:	Interlocking (Side)
Wire Termination:	Screw - Rising Cage Clamp
Series:	KP
Wire Gauge:	6-20 AWG
Voltage:	600V
Current:	65A
Mating Orientation:	Horizontal with Board
Pitch:	0.400" (10.16mm)
Positions Per Level:	2
Number of Levels:	1
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

KP0221500000G Application Field and Working Principle

Terminal blocks, also known as terminal strips, are used to attach a conductor to electrical components. These terminal strips are used to connect two different electrical components, such as a wire or a circuit board, to one another. The KP0221500000G terminal block is a type of terminal block designed for wire-to-board applications.A wire-to-board terminal block is a device used when two or more pieces of wire need to be connected to the same point in a circuit. It is designed to be easy to install and allow for secure connections between the wires and the circuit board. For wire-to-board applications, the terminal block is installed onto the board with screws, allowing the wires to be attached without soldering. This makes it easier to configure the circuit.The KP0221500000G terminal block is a 15-pin terminal block, meaning that it can connect up to 15 wires. It is a standard configuration and can accommodate wires with gauge sizes from Extra-Fine to 14 AWG. The pins are spaced at 9.5mm intervals, and the terminal block is rated for up to 300V. It is made of a high-temperature resistant PBT material that is rated for 155°C (311°F) and is designed to be used in harsh electrical environments.When connecting wires to the terminal block, the wire is inserted into the terminal block so that it is held securely in place. The end of the wire is then soldered to the terminal block and the opposite end of the wire is connected to the circuit board. The connection is secured with a small piece of insulation tape or a heat shrink tubing to ensure that the connection is not disrupted.The KP0221500000G terminal block is an industry-standard terminal block and is widely used in a variety of applications. It is typically used in consumer electronics, automotive, industrial, medical, and communications applications. It is also used in appliances such as air conditioning units and fridge-freezers. The KP0221500000G terminal block is a reliable and cost-effective solution for connecting multiple circuits in a variety of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description