KP0721500000G

Mounting Type:	Through Hole
Screw Thread:	M4.5
Torque - Screw:	1.32 Nm (11.7 Lb-In)
Screw Material - Plating:	--
Clamp Material - Plating:	Brass
Contact Material - Plating:	--
Housing Material:	--
Operating Temperature:	--
Color:	Green
Features:	Interlocking (Side)
Wire Termination:	Screw - Rising Cage Clamp
Series:	KP
Wire Gauge:	6-20 AWG
Voltage:	600V
Current:	65A
Mating Orientation:	Horizontal with Board
Pitch:	0.400" (10.16mm)
Positions Per Level:	7
Number of Levels:	1
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal blocks are manufactured using various raw materials to produce a variety of styles and sizes. The most common type of terminal block, known as the “wire to board” type, is used to connect individual wires to printed circuit boards. This type of terminal block includes a wide variety of options, such as the KP0721500000G application field and working principle. KP0721500000G is a wire-to-board terminal block from Wago. It is commonly used for applications such as interconnecting LED power supplies and flexible light strips. This type of terminal block is able to work with variety of wire types, such as solid, stranded or flexible conductors, allowing for maximum flexibility in design. The small size also aids in saving physical space as it requires minimal mounting space. The KP0721500000G terminal block has a number of properties that make it suitable for many types of electrically-connected applications. To begin, it is designed to have a current rating of 8A, which is higher than average. It also has a voltage rating of 250V, which is enough for most low-voltage applications. Finally, it also has a wire-to-board space of 2.5mm, providing adequate spacing for fitting onto PCB’s. In terms of operation, the KP0721500000G terminal block works by connecting two wires, either of different or the same size. The wires and the connections are held together in place via a series of springs. The springs act as the electrical contact between the two wires, and they provide a dampening effect to help reduce any electrical arcing that may occur due to the electrical connection. The springs also provide the terminal block with a level of protection against any accidental damage that may be caused by vibration or shock. When connected, the springs ensure that the connection is stable and secure, and they are also designed to absorb any electrical noise which may occasionally occur due to the number of other components in the system. The springs also help to protect against accidental disconnection by providing a physical barrier between the two terminals.In terms of installation, the installation procedure of the KP0721500000G terminal block is relatively straight forward. To begin, the two wires that need to be connected should be stripped and inserted into the two sides of the terminal block. Once the two wires have been inserted, the insulated cap should be placed onto the top of the block. This is important, as it prevents any moisture from seeping into the terminal block and potentially causing electrical issues. Lastly, the wire should then be secured in place with a set of screws. Overall, the KP0721500000G terminal block from Wago is an ideal choice for connecting two wires in a variety of applications. Its ability to handle a wide range of wire sizes, and its high current and voltage ratings, makes it suitable for a number of commercial and industrial tasks. In addition, its springs provide a great level of protection against accidental disconnections and electrical arcing, as well as providing an excellent dampening effect to minimize electrical noise. Finally, the compact size also ensures that it takes up very little space, making it the ideal choice for those applications that are size-restricted.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description