KQ1162000000G

Series:	KQ
Packaging:	Bulk
Part Status:	Active
Number of Levels:	1
Positions Per Level:	11
Pitch:	0.400" (10.16mm)
Mating Orientation:	Horizontal with Board
Current:	64A
Voltage:	300V
Wire Gauge:	6-22 AWG
Mounting Type:	Through Hole
Wire Termination:	Screw - Rising Cage Clamp
Features:	Interlocking (Side)
Color:	Black
Operating Temperature:	-40°C ~ 115°C
Housing Material:	Thermoplastic
Contact Material - Plating:	--
Clamp Material - Plating:	Zinc Alloy - Nickel Plated
Screw Material - Plating:	Steel - Zinc Plated
Torque - Screw:	2.15 Nm (19 Lb-In)
Screw Thread:	M4.5

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

KQ1162000000G Application Field and Working Principle

Terminal Blocks - Wire to Board are used in industrial applications and in the electrical fields where the raw material is wire. KQ1162000000G (KQ116) is a wire-to-board connector type that enables a stable connection by pushing its two pieces together. KQ116 is a widely used connector type as the pin-out is standardized, attractive due to the insulation it provides, and it is keyed to make sure the plug will fit only its matching socket.The KQ116 terminal block is mainly used in the automotive industry. As it offers several advantages, it’s used in numerous automotive components such as car audio systems, airbags, seat controls, and motor control systems. It is also used in industrial applications and various other commercial/consumer electronics equipment.

Details and Specifications

The KQ116 is a 2-position terminal block with a 2.5mm pitch connector. It has a keyed connecting interface and includes a pair of terminals with a built-in recess for holding the wire in place. This terminal block is made of UL94-V0 approved heat resistant PA66 with these specifications:- Rated current: 8A- Rated voltage: 600V- Number of positions: 2 position- Temperature range: -20C~+105C- Contact resistance: less than 5mΩ.

Working Principle

KQ116 terminal blocks are designed to securely connect the wires to the board without any need for soldering. It uses two pieces: the connector and the socket. To connect the two pieces, the connector is inserted into the socket and pushed until it clicks into place. To disconnect the two pieces, the terminal block can be simply pulled apart.The connector part of the terminal block is equipped with springs that press the contacts against the wire when it\'s inserted into the socket. This prevents short circuit possibility by providing a more secure connection between the wire and the terminal. The contact points also have sharp blades that will cut through the insulation of the wire as it’s pressed. This ensures a proper connection between the wire and the contact point.The socket part is where the connector part will be inserted into, and it is designed to provide a tight fit. To ensure that the connector fits perfectly into the socket, there is a keyed interface. This will make sure that the connector will fit only its corresponding socket.

Conclusion

KQ1162000000G is a 2-position terminal block that can be used in the automotive industry, industrial applications, and other commercial/consumer electronics equipment for wire termination. This terminal block has specialized contact points that provide a secure connection between the wire and the socket. Its keyed interface ensures that the connector fits only its corresponding socket.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description