KSZ8031RNLI-TR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The KSZ8031RNLI-TR is a 10Base-T/100Base-TX physical layer transceiver from Micrel Inc. It is an industry standard compliant 10 Mbps and 100 Mbps Ethernet transciever capable of operating over a range of 300 metres using Category 5 cable. It is designed for both full and half duplex operation and is compatible with the IEEE 802.3 Ethernet standard. It has an integrated 3.3V regulator to provide a power supply for the internal circuitry. The transceiver contains an on-chip zero cross-detect circuit which enables it to function without an external crystal. The transceiver can be configured to operate in either a full-duplex or half-duplex mode, which is ideal for use in networks where a mix of both possible types of connection can occur.

The KSZ8031RNLI-TR provides a standard three-pin interface to host processors, allowing for easy integration with existing host controllers. It has built-in support for various software and hardware interfaces, such as SPI/QSPI, MDIO/MDC, LED/HDLC and SMI. The KSZ8031RNLI-TR also supports the low-power sleep mode, allowing it to be used in low-power applications. The integrated 3.3V regulator is designed for use with 3.3V signal levels, allowing for a lower power requirement.

The transceiver is designed to operate over a single twisted pair of Category 5 cable, which is suitable for use in home networks and most other data transmission environments. The signal is transmitted in Manchester encoding, which is a bi-phase-encoded signal format. This allows for greater data integrity and improved performance in environments with high levels of noise. The transceiver is equipped with built-in cable equalizers, designed to optimize the signal for high-speed transmission over long distances. The equalizers are protected by a voltage protection circuit which prevents the chips from overvoltage and short circuit conditions.

The transceiver contains a control and state logic block which is responsible for handling the commands and instructions sent to the transceiver. This logic block includes a state machine and a timer that is used to monitor the link status. It also contains a register set which is used to configure the transceiver for the desired operating mode. Additionally, the control logic provides power down and reset functions and can be programmed to support a variety of link and module configurations and operating modes.

The KSZ8031RNLI-TR transceiver is a highly reliable and cost-effective solution for data transmission applications. It is a flexible and versatile device that can accommodate a wide range of transmission requirements, making it an ideal choice for a variety of applications. It\'s small size and low power consumption make it an ideal choice for battery-powered applications, while its robust design and integrated protection circuits ensure reliable data transmission over long distances.

The specific data is subject to PDF, and the above content is for reference