KSZ8081RNBCA-TR

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The KSZ8081RNBCA-TR is an Ethernet transceiver designed for operating in a wide range of temperatures and harsh environment. This transceiver has been designed to meet the requirements of the communication industry, providing reliable, low-cost Ethernet connectivity across a variety of applications. The transceiver is based on the KSZ8081RNBCA-TR transceiver, which is compliant with the IEEE 802.3 10Base-T Ethernet standard. The transceiver is equipped with a low-power stand-by mode and consumes less than 200mW of power in active mode.

The KSZ8081RNBCA-TR transceiver is a type of physical layer device (PHY) used to connect two devices together on an Ethernet network. It operates in the physical layer of the OSI (Open System Interconnection) model and can transmit data between two devices that are connected to it. The PHY is typically used to provide electrical isolation for the data signals between the two devices, so that the data can be transmitted without interference from external sources.

The KSZ8081RNBCA-TR transceiver is a high-performance device offering low power consumption and low latency. The transceiver supports full-duplex communication with an upper data rate of 10 Mbps, lower data rate of 5 Mbps, and a crossover point of 45 Mbps. The operating temperature range of the device is from -40°C to +85°C, which makes it suitable for use in a variety of industrial and commercial applications including medical applications.

The KSZ8081RNBCA-TR transceiver consists of a receiver, a transmitter, and a MAC (Media Access Control) module. The receiver is used to decode incoming data frames and convert them into electrical signals that can be read by the processor. The transmitter is used to convert data frames into electrical signals, and then send them over the physical layer. The MAC module is responsible for controlling the transmission and reception of the frames. The MAC module also handles the frame buffering and flow control.

The KSZ8081RNBCA-TR transceiver permits the connection of Ethernet devices at data rates up to 10 Mbps over a single twisted-pair cable and uses full duplex communication. The transceiver enables simple cabling, which supports a maximum length of 100 meters for a single connection. The device is equipped with wake-up pins and power-saving modes to ensure low power consumption when the Ethernet connection is idle.

In a network environment, the KSZ8081RNBCA-TR transceiver is used to transmit and receive data frames between the connected devices. The transceiver connects to a host PC using an RJ45 connector and a twisted pair of cables. The data frames received by the transceiver are converted into electrical signals and then sent to the host PC over the physical layer. The transceiver also receives signals from the host PC, decodes them, and generates the appropriate response.

The KSZ8081RNBCA-TR transceiver is a low-cost, low-power interface device, providing reliable communication across a variety of applications. It is compatible with various Ethernet protocols and can connect two devices over a single pair of cables. The transceiver supports a wide range of temperatures and is ideal for a variety of applications including medical, automotive, and industrial applications.

The specific data is subject to PDF, and the above content is for reference