KUP-11DA5-110

Turn On Voltage (Max):	82.5 VDC
Coil Resistance:	10 kOhms
Coil Power:	1.25 W
Contact Material:	Silver Cadmium Oxide (AgCdO)
Operating Temperature:	-45°C ~ 70°C
Termination Style:	Quick Connect - 0.187" (4.7mm)
Mounting Type:	Chassis Mount
Features:	Insulation - Class B
Release Time:	10ms
Operate Time:	15ms
Turn Off Voltage (Min):	--
Series:	KUP
Switching Voltage:	240VAC - Max
Contact Rating (Current):	10A
Contact Form:	DPDT (2 Form C)
Coil Voltage:	110VDC
Coil Current:	11.0mA
Coil Type:	Non Latching
Relay Type:	General Purpose
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

KUP-11DA5-110 is a Power Relay, Over 2 Amps. It is designed for applications in which a relay is required with a higher current rating. The KUP-11DA5-110 has a rating of 10 amps at 125/250 volts AC and 13.5 amps at 30 volts DC.This power relay can be used in a wide variety of applications. It can be used to control motors, pumps, lighting, solenoids, and other high-current loads. It can also be used to switch between two voltage sources. With its wide range of uses, this power relay is suitable for commercial, industrial, and residential uses.The working principle of the KUP-11DA5-110 is simple. When the contact points are closed, the current passes through the relay. The voltage across the contact points is two times the current flowing through them. This voltage is transformed into a low voltage signal which is used to control the switch.The KUP-11DA5-110 is a 2-port relay with a coil voltage rating of 24 volts AC and 32.4 volts DC. It has two single-pole double-throw contacts, which allow it to switch between two voltage sources. It is designed to provide reliable switching in a variety of electrical and electronic applications.The KUP-11DA5-110 has a high surge current capacity, which allows it to handle up to 5 times the normal current rating. This helps to prevent the relay from being damaged due to sudden spikes in current. The device also features a high insulation resistance, which ensures that the voltage across the contacts stays constant during operation.The KUP-11DA5-110 is designed for applications where you need to switch between two voltage sources. It is also suitable for motor, lighting, solenoid, and other higher current loads. Its high surge current capacity and high insulation make it one of the most reliable power relays over 2 amps.

The specific data is subject to PDF, and the above content is for reference