L0806B150JSWST Inductors, Coils, Chokes

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed inductors are electronic components with the sole purpose of providing inductance in a circuit. They are made using either air core inductors, ferromagnetic core inductors, or inductor coils. The L0806B150JSWST is a fixed inductor designed to provide an inductance of 150 uH in air core applications.

The L0806B150JSWST is a radial leaded, axial air core inductor. This means that it consists of a coil typically wound in a cylindrical shape with two axial wire leads extending on either end. The inductor is constructed with magnetically permeable, insulated wire and an encapsulated iron core with a wire winding around it. Its design makes it ideal to be used in various inductive applications, such as in switched mode power supplies, buck converters, and in AC low frequency circuits. Additionally, the inductor can also be used as an RF (Radio Frequency) choke in RF applications where a high impedance to RF signals is desired.

The L0806B150JSWST has a maximum DC current rating of 4.2A and a maximum DC resistance of 0.90 ohms. It is rated for an operating temperature range of -40 to +105 degrees Celsius. It has a maximum inductance of 150 µH and the Q factor is rated at around 80.

The L0806B150JSWST works by providing a fixed inductance in the response of a passing electrical signal. The inductor component creates a magnetic field when current passes through it. This magnetic field has an opposing effect to the changing current through the inductor, thus slowing down the rate of rise and reducing the voltage. This effect is referred to as induction. It is important to note that this inductance is not a constant, it is only roughly fixed and will vary with changing currents, temperatures, and frequencies.

The L0806B150JSWST inductor can also be used in filter applications. Here, the inductor is used to fix or maintain the specific frequency levels of a waveform. This is achieved by acting as a high-pass filter and blocking out frequencies lower than a specified frequency. The inductor can also be used to as a low-pass filter, blocking out frequencies higher than the specified frequency.

In summary, the L0806B150JSWST is a fixed inductor designed to provide an inductance of 150uH in air core applications such as switched mode power supplies, buck converters, AC low frequency circuits, and RF choke circuits. Its design makes it ideal for these applications due to its high DC current rating, low DC resistance, and wide operating temperature range. It can also be used in filter applications to maintain the frequency levels of a waveform.

The specific data is subject to PDF, and the above content is for reference