Allicdata Part #: | MT7191-ND |
Manufacturer Part#: |
L08P200D15 |
Price: | $ 6.26 |
Product Category: | Sensors, Transducers |
Manufacturer: | Tamura |
Short Description: | SENSOR CURRENT HALL 200A AC/DC |
More Detail: | Current Sensor 200A 1 Channel Hall Effect, Open Lo... |
DataSheet: | L08P200D15 Datasheet/PDF |
Quantity: | 1000 |
500 +: | $ 5.69110 |
Frequency: | DC ~ 100kHz |
Package / Case: | Module |
Mounting Type: | Through Hole |
Polarization: | Bidirectional |
Operating Temperature: | -20°C ~ 80°C |
Current - Supply (Max): | 12mA |
Response Time: | 10µs |
Voltage - Supply: | 15V |
Accuracy: | -- |
Linearity: | ±1% |
Series: | -- |
Sensitivity: | -- |
Output: | Ratiometric, Voltage |
Number of Channels: | 1 |
Current - Sensing: | 200A |
Sensor Type: | Hall Effect, Open Loop |
For Measuring: | AC/DC |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Current Transducers
L08P200D15 is a low power, single chip, optically-isolated Hall Effect current transducer. The device uses the Hall Effect to accurately and reliably measure current and can be used to isolate high voltage signals. The device consists of two parts, the input portion and the output portion. The input portion is comprised of an integrated Hall Element, built-in biasing circuitry, an isolated medium for signal conversion, and an output switch.
The Hall Element inside the input portion generates an output voltage in response to a current flowing through the Hall Element. The built-in biasing circuitry amplifies the output voltage generated by the Hall Element across the isolated medium. A control logic inside the device then uses the amplified voltage to switch the output on or off depending on the magnitude of input current.
The device is used mostly in automotive applications such as throttle, brake, transmission and cruise control systems. The Hall Effect transducer can also be used in industrial applications such as motor control, power supplies and automation systems. The devices are particularly useful in situations where high voltage signals need to be isolated from input circuitry.
The device has a wide operating range, wide temperature range and high accuracy. It is also highly reliable and can be used in a variety of applications. It can be used in any situation where current signals need to be accurately measured or isolated from input circuitry.
The L08P200D15 provides a programmable product with true isolation, wide operating and high accuracy in a single, integrated device. The L08P200D15 provides a powerful, integrated solution for current measurement applications in many industrial and automotive applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
L08P100D15 | Tamura | 10.58 $ | 1575 | SENSOR CURRENT HALL 100A ... |
L08P050D15 | Tamura | 10.58 $ | 197 | SENSOR CURRENT HALL 50A A... |
L08P150D15 | Tamura | -- | 485 | SENSOR CURRENT HALL 150A ... |
L08P200D15 | Tamura | 6.26 $ | 1000 | SENSOR CURRENT HALL 200A ... |
L08P100D15M1 | Tamura | 6.26 $ | 1000 | SENSOR CURRENT HALL 100A ... |
L08P150D15M1 | Tamura | 6.26 $ | 1000 | SENSORCurrent Sensor 150A... |
L08P200D15W | Tamura | 6.88 $ | 1000 | SENSOR CURRENT HALL 200A ... |
L08P100D15IPV | Tamura | 6.88 $ | 1000 | SENSORCurrent Sensor 100A... |
L08P300D15IPV | Tamura | 8.54 $ | 1000 | SENSORCurrent Sensor 300A... |
SENSOR CURRENT XFMR 40A ACCurrent Sensor...
SENSOR CURRENT XFMR 5A ACCurrent Sensor ...
SENSOR CURRENT HALL 15A AC/DCCurrent Sen...
3 PIECE KIT SENSOR CURRENT HALLCurrent S...
PACT RCP-4000A-1A-D190Current Sensor 100...
SENSOR CURRENT HALL 30A DCCurrent Sensor...