L12J6K8

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Chassis mount resistors, also known as "jumper resistors", often have a designator beginning with "L", followed by two digits indicating the length of the resistor in inches, one alphanumeric digit indicating a coefficient (ie 6k8 indicating 6,800 ohms) and the letter J. They are used in the industrial electronics sector, in their various shapes and forms, to provide adjustable resistors in applications that require protective covers and enclosures.

The L12J6K8 resistor is an adjustable, epoxy-sealed, single-turn, plastic-coated chassis-mount resistor which is designed to provide a simple, yet powerful, means of controlling current, voltage, and temperature in industrial and commercial applications. It has a 12-inch length, 6k8 coefficient, and J-shaped type leg design. It operates over a temperature range of –55° C to +125° C and its power rating at full temperature range is up to 6 Watts.

The most common applications for the L12J6K8 resistor include AC motor speed control, autonomous heater and hydraulic circuits, frequency control in power electronics circuits, and damping of high frequency signals. Typically used in conjunction with an analogue amplifier or PLCs, this type of resistor can provide a great degree of control over current, voltage, and temperature without the need for expensive or complex hardware.

The working principle of the L12J6K8 resistor is based on its adjustable resistance design, which enables it to reduce or increase the application\'s neutral point current in order to modify the circuit’s voltage, resistance, or power consumption. By changing the settings of the adjustable resistor, its resistance can be used to control the voltage, current, and power in the circuit. This helps to regulate temperature, current, and heat flux through the use of adjustable resistors.

The adjustable resistor’s resistance value can be adjusted by twisting the legs of the resistor while it is installed in the application. The adjustment mechanism usually works by increasing or decreasing the junction of its two legs, where the voltage is kept constant. As the gap changes, so does the resistance, allowing users to fine-tune the device’s current, voltage, and temperature performance.

The versatility and cost-effectiveness of the L12J6K8 chassis mount resistor make it ideal for applications that require flexible yet reliable control of current, voltage, and temperature within the industrial electronics sector. Its simple but effective adjustable resistance design means that it can provide precisely the performance needed while remaining cost-effective and reliable for the user.

The specific data is subject to PDF, and the above content is for reference