L254XF3S

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

RF filters are used in a variety of applications to separate or reject unwanted signals from desired signals. The L254XF3s is one type of RF filter that is a high-isolation, four-cavity, two-channel, compact filter with passbands centered to 900 MHz and 1800 MHz. It is intended for use with dual channel radio systems that require independent transmit and receive channels. It can also be used in multiple applications and systems involving frequency hopping, dual polarisation, frequency division multiplexing (FDM) and orthogonal frequency division multiplexing (OFDM) for both indoor and outdoor networks.

The L254XF3s filter can be characterized as an RF filter with a frequency range of 500 MHz to 2500 MHz. It has an operating temperature range of -40°C to +85°C, a minimum insertion loss of 6.5 dB, and a maximum VSWR of less than 2.5:1. The device is constructed with parallel feed-through chambers and presents a high-isolation of approximately 35 dB over the passband.

The working principle of the L254XF3s filter is based on the idea of multiple resonance cavities, or passbands. Each chamber contains a trisection line that is powered by a lumped capacitance at the end of each chamber. The two sections of the trisection line are then connected in series, with the two other sections at the reject bands of the device being left disconnected. The result is three different passbands of frequency that are separated by two reject bands of similar frequencies.

The trisection lines also provide for sharp roll-off and selectivity between the desired and the undesired frequencies. The L254XF3s filter is designed to reject or isolate undesired frequencies while allowing the desired frequencies to remain undisturbed. The L254XF3s filter is highly efficient at providing signal isolation over a wide range of frequencies, and is particularly well suited for dual channel radio systems with narrow frequency bands. The filter is also ideal for applications that require high-performance communication systems with multiple frequency hopping, multi-polarization, and frequency division multiplexing (FDM).

In conclusion, the L254XF3s filter is a high-isolation, four-cavity, two-channel, compact filter with passbands centered to 900 MHz and 1800 MHz. It is capable of providing signal isolation over a wide range of frequencies. The device is well suited for use with dual-channel radio systems and applications that require high performance communication systems. It is also ideal for frequency hopping, multi-polarization, and FDM/OFDM systems.

The specific data is subject to PDF, and the above content is for reference