Allicdata Part #: | L32P200S05FS-ND |
Manufacturer Part#: |
L32P200S05FS |
Price: | $ 7.36 |
Product Category: | Sensors, Transducers |
Manufacturer: | Tamura |
Short Description: | SENSOR CURRENT HALL 200A AC/DC |
More Detail: | Current Sensor 200A 1 Channel Hall Effect, Open Lo... |
DataSheet: | L32P200S05FS Datasheet/PDF |
Quantity: | 1000 |
100 +: | $ 6.68902 |
Frequency: | DC ~ 50kHz |
Package / Case: | Module, Single Pass Through |
Mounting Type: | Through Hole |
Polarization: | Bidirectional |
Operating Temperature: | -40°C ~ 85°C |
Current - Supply (Max): | 15mA |
Response Time: | 5µs |
Voltage - Supply: | 5V |
Accuracy: | -- |
Linearity: | ±0.5% |
Series: | -- |
Sensitivity: | -- |
Output: | Ratiometric, Voltage |
Number of Channels: | 1 |
Current - Sensing: | 200A |
Sensor Type: | Hall Effect, Open Loop |
For Measuring: | AC/DC |
Part Status: | Active |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Current transducers are electrical and electronic devices that measure current and then provide a proportional output signal in terms of voltage or a current of lesser value. The L32P200S05FS current transducer is designed for monitoring AC current in challenging power system applications. This current sensor operates over a wide operating temperature range (-40 to 100 °C) and provides current measurement accuracy of 0.5\%. The device can accurately transfer AC current signals from small signal sources like current carrying coils to powerful systems with a relatively small footprint.
The L32P200S05FS current transducer comes in the form of a two-wire or clip-on current transducer. A two-wire system utilizes a primary conductor and a secondary conductor, while a clip-on type only requires one conductor to sense current. The primary conductor is connected to the electrical network or device under monitoring, while the secondary conductor is connected to the monitoring instrument. The current transducer works in the following way: the primary conductor carries the current that is also present in the device under monitoring, which is then detected by the secondary conductor. The transducer uses Hall Effect principle to convert the measured current into a voltage signal.
In addition to its two-wire or clip-on design, the L32P200S05FS current transducer is also equipped with Galvanic Isolation and Zero Crossing Technology for improved safety and accuracy. The Isolation ensures that the monitoring instrument is electrically disconnected from the device under measurement, while the Zero Crossing technology helps eliminate electrical noise and interference from the output signal. The device has a wide voltage range (12-36V DC) and is highly efficient, with a power consumption of less than 0.3 W.
The L32P200S05FS current transducer is mainly used in power systems, such as in switchgear, control circuits, and motors. It can be used to monitor AC current in both high and low voltage networks. Moreover, this device is rugged enough to be used in harsh industrial environments. Its compact design makes for easy installation and its insulation and protection make it safe for use. The device outputs an analog voltage signal which can be used to control automation devices, and as input signals for PLCs, digital controllers, and other devices.
In conclusion, the L32P200S05FS current transducer is designed for accurate AC current measurement in challenging power system applications. Its two-wire or clip-on design, coupled with Galvanic Isolation, Zero Crossing Technology, a wide voltage range, and a low power consumption make it an ideal solution for monitoring AC current in both high and low voltage networks. Its rugged design and ease of installation make it perfect for use in harsh industrial environments.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
L32P050S05FS | Tamura | 7.36 $ | 1000 | SENSOR CURRENT HALL 50A A... |
L32P100S05FS | Tamura | 7.36 $ | 0 | SENSOR CURRENT HALL 100A ... |
L32P150S05FS | Tamura | 7.36 $ | 1000 | SENSOR CURRENT HALL 150A ... |
L32P200S05FS | Tamura | 7.36 $ | 1000 | SENSOR CURRENT HALL 200A ... |
L32P300S05FS | Tamura | 7.36 $ | 1000 | SENSOR CURRENT HALL 300A ... |
L32P400S05FS | Tamura | 7.36 $ | 1000 | SENSOR CURRENT HALL 400A ... |
L32P050S05BFS | Tamura | 8.18 $ | 1000 | SENSOR CURRENT HALL 50A A... |
L32P100S05BFS | Tamura | 8.18 $ | 1000 | SENSOR CURRENT HALL 100A ... |
SENSOR CURRENT XFMR 40A ACCurrent Sensor...
SENSOR CURRENT XFMR 5A ACCurrent Sensor ...
SENSOR CURRENT HALL 15A AC/DCCurrent Sen...
3 PIECE KIT SENSOR CURRENT HALLCurrent S...
PACT RCP-4000A-1A-D190Current Sensor 100...
SENSOR CURRENT HALL 30A DCCurrent Sensor...