L6004D3TP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The L6004D3TP is a popular semiconductor device belonging to the thyristor-TRIAC. It is an ideal solution for various AC switching, phase control and medium power applications.

Thyristor-TRIACs are two terminal, three layer semiconductor devices based primarily on PNPN technology. Their main purpose is to control the current of an alternating voltage waveform in order to achieve the desired power control. This type of semiconductor device can operate in two main paths—control and conduction. The control path works by controlling the amplitude of the wave so that it quickly rises up to the required peak, thus making it possible to use the device for applications such as switching, dimming and AC phase control.

The L6004D3TP thyristor-TRIAC is a four-quadrant, high power bidirectional device used in a wide range of applications, such as motor controls, SCRs and solid state relays, in addition to standard AC motor control in industrial applications.

The typical va-tage-current curves of this device are given in its datasheet and they show how it operates in both the forward and reverse directions. This device is also known as a high linearity device, as it is capable of producing high linearity current waveforms and voltage waveforms, suitable for motor control and other AC applications. It also has the ability to offer high energy efficiency, since the conduction takes place without the need for high voltage throughout the cycle.

The typical working principle of the L6004D3TP thyristor-TRIAC is as follows. A control signal is applied to the gate terminal from the voltage supply, which causes the SCR to turn on and remain on until the current is below a certain set limit. The device then behaves like an "open switch" preventing current from flowing through the main current terminals until the gate current signal is again applied. In the reverse direction, the device behaves differently and it is employed for AC phase control. In this mode, the device behaves like a variable resistor, with the resistance being affected by the gate current.

The L6004D3TP thyristor-TRIAC is used in a wide range of applications, such as motor control, SCRs and solid state relays, in addition to standard AC motor control in industrial applications. Its features include a three-phase AC voltage output capability, a high current and voltage rating and an integrated temperature compensation circuit, making it suitable for a variety of AC loads. It is also compatible with a range of control signals, including pulses and pulses with modulation.

In conclusion, the L6004D3TP thyristor-TRIAC is a widely used semiconductor device with various applications in motor control, SCRs, solid state relays and other AC switching and phase control applications. It offers high efficiency, reliable performance and integrated temperature compensation, making it an ideal solution for industrial power control applications.

The specific data is subject to PDF, and the above content is for reference