| Allicdata Part #: | L9352B-TR-LF-ND |
| Manufacturer Part#: |
L9352B-TR-LF |
| Price: | $ 0.00 |
| Product Category: | Integrated Circuits (ICs) |
| Manufacturer: | STMicroelectronics |
| Short Description: | IC IPS LOW SIDE QUAD POWERSO36 |
| More Detail: | N/A |
| DataSheet: |  L9352B-TR-LF Datasheet/PDF |
| Quantity: | 1000 |
| Voltage - Supply (Vcc/Vdd): | 4.5 V ~ 5.5 V |
| Base Part Number: | L9352B |
| Supplier Device Package: | PowerSO-36 |
| Package / Case: | 36-BSSOP (0.433", 11.00mm Width) Exposed Pad |
| Operating Temperature: | -40°C ~ 150°C (TJ) |
| Fault Protection: | Open Load Detect, Over Temperature |
| Features: | Status Flag |
| Input Type: | Non-Inverting |
| Rds On (Typ): | 200 mOhm |
| Current - Output (Max): | 2.5A, 5A |
| Series: | -- |
| Voltage - Load: | 4.8 V ~ 18 V |
| Interface: | -- |
| Output Type: | N-Channel |
| Output Configuration: | Low Side |
| Ratio - Input:Output: | 1:1 |
| Number of Outputs: | 4 |
| Switch Type: | General Purpose |
| Part Status: | Active |
| Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The L9352B-TR-LF power management integrated circuit (PMIC) is a multifunctional device designed for use in automotive applications. Specifically, it is a power distribution switch, load driver and low-side or high-side switch driver. It is produced by STMicroelectronics and offers integrated, low-carbon operation, superior safety, and long-term reliability in critical automotive applications.
The L9352B-TR-LF provides a comprehensive range of features in a single package, offering a wide range of programming, protection and monitoring capabilities. It can provide 120 A of continuous current and can withstand short-circuit and overcurrent conditions for up to 30 seconds.
The L9352B-TR-LF power distribution switch can be used in a variety of automotive applications, including engine control, emission control, transmission shift control and motor control. The switch uses an on/off pin to control power distribution in the application. The load driver is used to drive high-power loads such as traction control, motor control and powertrain control. It features low-side or high-side operation dependent on the application and offers excellent protection, including overcurrent and short-circuit protection.
The L9352B-TR-LF can be used as a low-side or high-side switch driver, depending on the application. The on-board driver offers short-circuit protection and is interfaced with a wide range of automotive systems. It is designed to switch up to 40A, with a total waveform of up to 10V, and an input voltage range of 4V to 40V.
The L9352B-TR-LF is designed for use with automotive systems and offers superior performance, reliability and protection. It can drive high power loads with low-side or high-side operation, has a wide input voltage range and provides a comprehensive range of features in a single package. It is suitable for use in a variety of automotive applications, including engine control, emission control and motor control.
The specific data is subject to PDF, and the above content is for reference
| Part Number | Manufacturer | Price | Quantity | Description |
|---|
| L935 | 11.52 $ | 1000 | TAPE,POWER,1"X35',CLASSIC... | |
| L9352B-TR-LF | STMicroelect... | -- | 1000 | IC IPS LOW SIDE QUAD POWE... |
| L9352B-LF | STMicroelect... | -- | 1000 | IC IPS LOW SIDE QUAD POWE... |
EXPRESS CARD PWR SWITCH
PSC LOAD SWITCH V-DFN3030-10
IC DARL DRIVER ARRAY 4CH
IC USB POWER SWITCH 8MSOP
IC SW IPS 1CH HIGH SIDE D2PAK-5
IC SW IPS 1CH HIGH SIDE 8SOIC