Allicdata Part #: | L98SI013TR-ND |
Manufacturer Part#: |
L98SI013TR |
Price: | $ 0.00 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | STMicroelectronics |
Short Description: | IC DRIVER SOLENOID OCT POWERSO20 |
More Detail: | N/A |
DataSheet: | L98SI013TR Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Voltage - Supply (Vcc/Vdd): | -- |
Base Part Number: | L98 |
Supplier Device Package: | PowerSO-20 |
Package / Case: | 20-SOIC (0.433", 11.00mm Width) Exposed Pad |
Operating Temperature: | -40°C ~ 125°C (TJ) |
Fault Protection: | -- |
Features: | -- |
Input Type: | -- |
Rds On (Typ): | 550 mOhm |
Current - Output (Max): | 750mA |
Series: | -- |
Voltage - Load: | 4.5 V ~ 5.5 V |
Interface: | SPI |
Output Type: | -- |
Output Configuration: | Low Side |
Ratio - Input:Output: | 1:1 |
Number of Outputs: | 8 |
Switch Type: | Relay, Solenoid Driver |
Part Status: | Obsolete |
Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The L98SI013TR is a member of the Power Distribution Switches, Load Drivers family, which are a type of Power Management Integrated Circuit (PMIC). The L98SI013TR is an integrated switch designed for use in high power industrial, commercial, and automotive applications. It controls the connection between an input voltage source and a load, allowing for remote on/off, power supply sequencing, and protection against overloads and shorts.
The L98SI013TR integrates a switch, a high side overload protection, and a low side overload protection circuit into a single integrated circuit package. It is designed to operate over a wide input voltage range and operate over a wide temperature range. The integrated protection circuits ensure reliable operation, even under extreme environmental conditions. The L98SI013TR also features an enhanced glitch immunity interface to reduce transient errors.
The basic principle of operation of the L98SI013TR is simple. When the power is turned on, a control signal from the user-connected device is applied to the switch to open or close the switch. When the switch is opened, the connection between the input voltage source and the load is broken, and the output voltage is low. When the switch is closed, the connection is maintained, and the input voltage is applied to the load. By controlling the switch with a control signal, the power delivered to the load can be managed and regulated.
The L98SI013TR is also capable of advanced power management functions such as load detection, power interrupt functions, and remote control. The load detection function allows the device to detect if the connected load is ready to accept the input voltage, and the power interrupt function allows the device to suspend the connection if an overload or short circuit event is detected. The remote control feature allows the device to be controlled remotely via a network of connected devices, allowing for a distributed power management system.
The L98SI013TR is designed for use in high power applications. It is capable of handling input voltages up to 175V and can switch up to 11A of continuous current. The integrated high side and low side overload protection features provide protection against voltage and current overloads, and the enhanced glitch immune interface ensures reliable operation. The L98SI013TR is a reliable and cost-effective solution for power management and power distribution applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
L98SI | STMicroelect... | -- | 1000 | IC DRIVER SOLENOID OCT PO... |
L98SI013TR | STMicroelect... | 0.0 $ | 1000 | IC DRIVER SOLENOID OCT PO... |
EXPRESS CARD PWR SWITCH
PSC LOAD SWITCH V-DFN3030-10
IC DARL DRIVER ARRAY 4CH
IC USB POWER SWITCH 8MSOP
IC SW IPS 1CH HIGH SIDE D2PAK-5
IC SW IPS 1CH HIGH SIDE 8SOIC